Another extra for membership. This one is a beautiful print!
For this Model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mm
The Model is 160x200mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 1.9mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #5 (0.64mm) swap to Scarlet Red
At layer #9 (0.96mm) swap to Ash Gray
At layer #11 (1.12mm) swap to Jade White for the rest.
