Abstract fun in surreal background - Set of bookmarks
Week 63 - Messed around this weekend and this is what was created.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Green (10500) Transmission Distance: 2 PLA Bambu Labs Basic Blue (10601) Transmission Distance: 4 PLA Bambu Labs Basic Hot Pink (10204) Transmission Distance: 4.5 PLA Bambu Labs Basic Gold (10401) Transmission Distance: 3.5 This print uses 4 unique filaments
Swap Instructions: Start with Green (10500) At layer #8 (0.72mm) swap to Blue (10601) At layer #13 (1.12mm) swap to Hot Pink (10204) At layer #18 (1.52mm) swap to Gold (10401) for the rest.
























