Bonus set for this week - a pair of sweethearts taking walks through growing up together. three different years with the same feelings.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 68.57x205mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Charcoal
At layer #10 (0.88mm) swap to Dark Brown
At layer #15 (1.28mm) swap to Beige
At layer #21 (1.76mm) swap to Ivory White for the rest.