tracking pixel
Michael M

A storming little warrior - Imperial little Stormtrooper Fan Art for Star Wars

by
BooneCo3d
Follow
Follow
Remix Model
BooneCo3d
BooneCo3d
|
Image 1 of 3
A storming little warrior - Imperial little Stormtrooper Fan Art for Star Wars 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 3
A storming little warrior - Imperial little Stormtrooper Fan Art for Star Wars 3d model
2D
3D
Makes
A storming little warrior - Imperial little Stormtrooper Fan Art for Star Wars 3d model
A storming little warrior - Imperial little Stormtrooper Fan Art for Star Wars 3d model
A storming little warrior - Imperial little Stormtrooper Fan Art for Star Wars 3d model

Sharing some art tonight with the members here. I have a set of 5 little one from Star Wars fan art. Chewy first.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 143.68x210mm in size You may print at higher layer heights below the Min Depth of 0.32mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Dark Blue At layer #10 (0.88mm) swap to Beige

Border Only Colors from here until the end. At layer #20 (1.68mm) swap to Jade White for the rest.


0 Likes1 DownloadsNovember 8, 2024


0 Likes1 DownloadsNovember 8, 2024