A little break for a bath - Mini Dragon playing in a teacup - set of bookmarks

Bonus right off the bat - week 11. This was one I knew had to be published. The little guy is enjoying a cup of tea in a unique way.

For these Models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 65.03x205mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Red Transmission Distance: 1.5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Red At layer #10 (0.88mm) swap to Beige At layer #15 (1.28mm) swap to Jade White for the rest.