**For the sake of a contest, I'd appreciate if you downloaded the model off my printables page, thank you in advance: 
https://www.printables.com/model/972397-camp-trowel
There you will find the STL file**

Ultralight-ish backpacking/camping trowel. 
Weighs in at 70 grams of material.

This is considered V1, will put it through its paces and see where i can shave off some weight, while keeping it robust enough to dig catholes.

3MF file includes the print settings. But key settings are:
-.20 layer height

-5 wall count

-10 bottom layers

-5 top layers

Camp Trowel

trowel.3mf

**For the sake of a contest you can download missing files if you mosey on over to my makerworld page, all STL & .3MF files are there for an easy print, thanks in advance:
https://makerworld.com/en/models/582129#profileId-503251**

Sorry teacher, I shredded up my homework.
The desk is your oyster, shred your pencil case, your textbook, your pencil, anything and everything with this simple fingerboard. Functional pencil case with a phone stand and a fun little toy for your kids to mess around with during recess or something you can mess around with between classes.

It's tricky but fun! Pun intended
For the hinges; cut a couple pieces of filament, push them in and melt the ends.

I've included 3MF files for the smooth top or fuzzy skin top for some grip if you just want the fingerboard, as well as another file for the pencil case without the phone stand.





Enjoy!

Pencil Case-Skate Inspired w/Fingerboard

Pencil Case Ledge without Phone Stand.stl

Name Badge Clip for 4x3 inch name badge sleeves.  
Had some fun with this one, i never use the retractable lanyard. I would tape the top shut to secure all my cards inside. Figured it would be a perfect solution for 3D printing.

Reference Slicer screenshot for print orientation, no special settings, post processing includes cleaning up some edges so the slider moves freely over the two clam shells.

Stay tuned for modifications and more sizing if demand calls for it

Name Badge Clip

ID Card hole.stl

Tripod Mount for your Instax mini 40.

You will have to work in the retaining clips, just be mindful with how much force you're applying. I plan to upload a secondary "body" file for a threaded insert, but for now you'll have to form the threads into the base.

I've included the .3MF file, but if you don't use bambu studio/makerworld, the body can be split into "Parts" and the threaded hole should have a wall count of 4. If you're having trouble in your slicer, just increase the overall wall count for the "body" to 4.

https://makerworld.com/en/models/541034#profileId-458554

Otherwise .2mm layer height, 8% cross hatch infill, printed in PLA

Would love to hear some feedback

Instax Mini 40 mount

Left Clip.stl

Upcycle your used up protein containers into garbage cans or use to collect miscellaneous small items!  My initial thoughts were to use it as a vehicle trash bin.
Have two sets of files, for 110 and 120mm lid sizes, not all protein containers have the same diameter lid, so make sure to measure.

Had some fun designing the mechanism, assembly instructions are provided in the images.  For smoothest action, smooth any imperfections you find in the pivoting mechanism and apply some sort of lubricant. All you need to source is a medium sized rubber band, which everyone has in their junk drawer somewhere.

Standard print settings, .2 layer height, printed in pla or petg, and 15% infill


If you're happy with the design, and had a successful print, AND you're feeling generous, you can tip me no more than a buck on my paypal: http://paypal.me/bombastic3D

Appreciate those that do! Thanks

Garbage Lid for Protein Container

Dome and Lid.stl

120mm Pin.stl

120mm Pin and Support.stl

120mm Hinge.stl

120mm Dome and Lid.stl

Do your hands cramp when jotting a metric Ton of workload with the slim but feature packed Spen? Ever thought to yourself; "I wish I had more girth?

Well, you've come to the right page.

I designed this stylish SPen sleeve to carry around with me during class or if I'm getting into an intense doodle. It's comfortable, looks and feels great.

I've included two end caps in the .3MF Files, one with a clip and one without. Choose to your liking. If you're not using the .3MF file provided, make sure you split the model into its main components and orientate them as shown in the screenshot.

I've tested the fitment with Note 20, S22 Ultra, and S24 Ultra Spens.

The taper holds the two halves together, simply twist and pull to separate. Just be careful when handling the sleeve without the Spen inside, due to layer line orientation it may be prone to breaking without the Spen adding rigidity and support.
The clip is printed separately, and has a dove tail with a nice friction fit. Just break off the small custom support and carefully slide it in.

If you're happy with the design, and had a successful print, AND you're feeling generous, you can tip me no more than a buck or two on my PayPal:

http://paypal.me/bombastic3D

Appreciate those that do! Thanks

3D PRINTING SETTINGS
Designed around PLA settings, can attempt with PETG.

.4mm nozzle diameter
.16 mm layer height
230C nozzle temp
No supports or brims needed

Printed on Bambu P1P

Samsung SPen UPGRADE Sleeve

Spen Sleeve.3mf

I bought my shifter used.. with no clamp, sounds like a project for the 3D printer.  The clamp turned out pretty tough, seems to withstand the abuse.  Only time will tell.

Brief Instructions:

-To reinforce and add to the longevity, i left a hole in the center of the screw knob, that will accept an #8, 3 inch long wood screw.  Chose something standard, you can find just about anywhere. You will need to screw it in by hand, all the way to the bottom until you feel it get tight, then give a quarter turn. Screw it in tight, but careful not to go overboard
-Then thread the screw into the clamp, and once the ball of the screw is through, you can push on the pivot feature.
-You will also need x4 M6x15mm hardware, i used socket head cap screws.
-For better grip, I'd add a couple layers of electrical or duct tape on the face of the clamp that makes contact with the table top.
-When mounting the clamp, you'll notice the screw slightly angles towards the shifter; tighten until the screw straightens out, perpendicular to the bottom surface. No need to overtighten.

Would love to see some makes, post up some pictures and any feedback would be appreciated!

If you're happy with the design, and had a successful print, AND you're feeling generous, you can tip me $1 on my paypal:  http://paypal.me/bombastic3D

Appreciate those that do! Thanks

TH8A Shifter Clamp

th8a clamp 3mf.3mf

Cute Jigglypuff is watching.

Print in the photo's has been scaled down for testing purposes(40mm tall). More detail will show the more you scale up of course.

If you're happy with the design, and had a successful print, AND you're feeling generous, you can tip me no more than a buck on my paypal: http://paypal.me/bombastic3D

Appreciate those that do! Thanks

3D PRINTING SETTINGS
Supports on the left hand and underside needed. Provided in the 3MF file.

Suggest using .12 or .16 layer height for maximum wrinkles.

Cute Jigglypuff

Jigglypuff.stl

Guitar pick holder game board piece I designed for a friends project.
No fancy settings, print away!
Available in various different pick thicknesses

Guitar pick board piece

Pick board piece 1.2mm.stl

Print in place cap for your Sawyer Squeeze, avoid drips when stored away in your pack.
For the unfiltered side of your sawyer squeeze water filter.
Print in place swivel so the cap can turn freely and is secured to the filter so you don't lose it.
Can use a length of 550 paracord, remove one internal core strand and tie it around the groove of the filter.

3D PRINTING SETTINGS
Will attach my .3MF file, but pretty standard settings;
FDM
15% infill
2 wall
No supports needed
Printed in PLA or PETG

If you're happy with the design, and had a successful print, AND you're feeling generous, you can tip me no more than a buck or two on my PayPal:

http://paypal.me/bombastic3D

Appreciate those that do! Thanks

Sawyer Squeeze Drip Cap

Sawyer Squeeze Cap.stl

Dimebag Derrel from the band Pantera. Two options, one with a shadow, the other is just the silhouette.
Can also split the base off and hang it on the wall.

Sized to max the build volume on the bambu P series.

Dimebag Derrell

Dimebag Derrel.stl

Pearl Jam Stick Man.stl

---Spen - cap without clip.stl

---Spen - Body with support.stl

---Spen - cap with clip.stl

---Spen clip and support.stl

---Spen - body without support.stl

I'm a millwright by trade; I've taken a keen interest in 3D modelling, and having some fun bringing my ideas to life.
My focus are functional designs, but like to dabble in whatever tickles my fancy.

I keep adding to my list of design ideas so stay tuned!


If you're happy with my designs, and had a successful print, AND you're feeling generous, you can tip me on my paypal: http://paypal.me/bombastic3D

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Bombastic3D

Achievements

Seedling

Debutant

Pinned models

Samsung SPen UPGRADE Sleeve

Pencil Case-Skate Inspired w/Fingerboard

Camp Trowel

Camp Trowel

Pencil Case-Skate Inspired w/Fingerboard

Name Badge Clip

Instax Mini 40 mount

Garbage Lid for Protein Container

Samsung SPen UPGRADE Sleeve

TH8A Shifter Clamp

Cute Jigglypuff

Guitar pick board piece

Sawyer Squeeze Drip Cap

Dimebag Derrell

Pearl Jam Stick Man.stl