Here is Zombie fully articulated, this super cool fan art toy is the perfect thing for anyone who loves minecraft, this amazing model is fully articulated every limb head and joint moves. The body and legs use's an awesome print in place design, the head and arm's just push into there socket's. To assemble the model simply print off the piece's then make sure to unclick the legs from the body if there to well stuck to the body then use the included zombie body legs extra space model. To make the legs move, run a blade or knife along the joint that connects to the body to the legs then slowly twist the legs until they move freely. Once the legs and arm's moving freely, simply push and twist the arms or head in to there dedicated sockets until they touch the body. Print settings, No supports needed apart from the head, Support type normal, support placement touching build plate,(if your using bambu studio don't use supports auto, paint the supports onto the bottom of the neck socket) Nozzle size 0.4mm, Layer height 0.2mm, Print speed 50ms, Infill 15%, Infill pattern Grid, If your using Bambu studio increase the line width for sparse infill to 0.6mm, outer wall 0.6mm, Inner wall 0.6mm, everything else 0.4mm line width,