Seed peeler Domo

Here is Seed peeler Domo, Inspired by a friends design he made. I made my own seed peeler so it looks like Domo cartoon character. Supports needed, Support placement everywhere, support over hang angle 50%, Support type normal, Support pattern Gyroid, Support density 15%, printed with a 0.4 nozzle at 35ms. Also there's a only one way the rollers go in the long side of the roller slides in first, to the left side. Then push the roller down to line up with the right side hole, next use the outside of the left hole to push the roller into the right hole. Check Second Photo for reference.