Select a membership plan

Model is included in this plan
Available now

Favourite four Premium models
$5.00
/ month
  • Pick your favourite four premium Models for the month (4 downloads per month, not used downloads roll over to the next month)

-(STL file not for distribution, Do not share online, if you want to share a file with a friend make sure to gift it in person only, (USB, SD, Etc.)(personal use license No selling of any kind) Any support is greatly appreciated❤️. Alternatively you can buy a single design on my page. Thank you all for your support!

Model is included in this plan
Available now

Personal Use Unlimited
$10.00
/ month
  • Access to all models for personal use (no download limit)

-(STL file not for distribution, Do not share online, if you want to share a file with a friend make sure to gift it in person only, (USB, SD, Etc.)(personal use license No selling of any kind) Any support is greatly appreciated❤️. Alternatively you can buy a single design on my page. Thank you all for your support!

Model is included in this plan
Available now

Commercial Use Unlimited
$20.00
/ month
  • Access to all models for personal use (no download limit)

  • unlimited different models total of your choosing to sell commercially.

  • Ability to request changes + higher priority

  • ability sell these products across as many accounts as you like e.g. Etsy, eBay, Facebook, But only 1 certified seller badge per person (license's not available for Registered manufactures).

  • Access to Certified Seller badges, and banners (Link in email) (make sure to keep a copy of these as they change periodically) (Small Commercial licenses only available on Thangs. You may also use any images on my profile for selling commercially, but this may flag Thangs IP protection, if I see a flag I'll just message you to double check. (STL file not for distribution, not to be used in movies, animation, games etc.) If your not sure about any information here please message me or comment.

BigBoomPrints
BigBoomPrints801 followers
Follow
BigBoomPrints
BigBoomPrints
|
Image 1 of 8
MagSafe charger crystal 3d model
BigBoomPrints
BigBoomPrints
|
Image 1 of 8
MagSafe charger crystal 3d model
MagSafe charger crystal 3d model
MagSafe charger crystal 3d model
MagSafe charger crystal 3d model
MagSafe charger crystal 3d model
MagSafe charger crystal 3d model
MagSafe charger crystal 3d model
MagSafe charger crystal 3d model
MagSafe charger crystal 3d model

MagSafe charger crystal

Here is MagSafe charger crystal, This amazing crystal will power up your phone in no time, No supports needed, Print in Place. Simply print the model, then line the hole with a small amount of blue tac then insert your MagSafe charger or similar charger, then use the cable channel to run the cable behind the crystal, and place a small amount of blue tac underneath the crystal to hold the cable in place, I used PLA and found the Blue Tac surprisingly strong, if you have troubles getting the blue tac to stick I recommend double sided tape. Print settings, Nozzle size 0.4mm, Layer height 0.2mm, No supports, Print speed 60ms, infill pattern Grid, Infill density 15%


Discussions
Jacob B
jbruner57

I just printed this it looks great. Any chance you could design a version that holds the phone sideways? To take advantage of the new iphone horizontal idle display.

BigBoomPrints
BigBoomPrints

Ok the horizontal version is all done and up https://than.gs/m/971284

MagSafe charger crystal

34 downloads · 3 years ago in  and 
BigBoomPrints
BigBoomPrints801 followers
Follow