Select a membership plan

Model is included in this plan
Available now

Favourite four Premium models
$5.00
/ month
  • Pick your favourite four premium Models for the month (4 downloads per month, not used downloads roll over to the next month)

-(STL file not for distribution, Do not share online, if you want to share a file with a friend make sure to gift it in person only, (USB, SD, Etc.)(personal use license No selling of any kind) Any support is greatly appreciated❤️. Alternatively you can buy a single design on my page. Thank you all for your support!

Model is included in this plan
Available now

Personal Use Unlimited
$10.00
/ month
  • Access to all models for personal use (no download limit)

-(STL file not for distribution, Do not share online, if you want to share a file with a friend make sure to gift it in person only, (USB, SD, Etc.)(personal use license No selling of any kind) Any support is greatly appreciated❤️. Alternatively you can buy a single design on my page. Thank you all for your support!

Model is included in this plan
Available now

Commercial Use Unlimited
$20.00
/ month
  • Access to all models for personal use (no download limit)

  • unlimited different models total of your choosing to sell commercially.

  • Ability to request changes + higher priority

  • ability sell these products across as many accounts as you like e.g. Etsy, eBay, Facebook, But only 1 certified seller badge per person (license's not available for Registered manufactures).

  • Access to Certified Seller badges, and banners (Link in email) (make sure to keep a copy of these as they change periodically) (Small Commercial licenses only available on Thangs. You may also use any images on my profile for selling commercially, but this may flag Thangs IP protection, if I see a flag I'll just message you to double check. (STL file not for distribution, not to be used in movies, animation, games etc.) If your not sure about any information here please message me or comment.

BigBoomPrints
BigBoomPrints797 followers
Follow
BigBoomPrints
BigBoomPrints
|
Image 1 of 7
Honeycomb storage bin 3d model
BigBoomPrints
BigBoomPrints
|
Image 1 of 7
Honeycomb storage bin 3d model
Honeycomb storage bin 3d model
Honeycomb storage bin 3d model
Honeycomb storage bin 3d model
Honeycomb storage bin 3d model
Honeycomb storage bin 3d model
Honeycomb storage bin 3d model
Honeycomb storage bin 3d model

Honeycomb storage bin

Here is Honeycomb storage bin, This incredible design will make a catchy decoration for anyone in need of a little storage, The incredible design is a no supports needed design just load in and slice away, Print settings, No supports needed, Layer height 0.2mm, Nozzle size 0.4mm, Print speed 50ms, Infill 15%, PLEASE BE AWARE if your using Bambu studio or Prusaslicer you need to change your bridging direction to 45 degrees and your infill/wall overlap to 25% or higher I recommend 50%, I also recommend turning off Detect narrow internal solid infill. All these settings are under the strength tab in Bambu studio when advanced is turned on check photo for reference. You also need to change the line width to 0.4mm, and 0.6mm for the outer wall line width and the sparse infill line width to 0.6mm


Discussions

Honeycomb storage bin

58 downloads · 2 years ago in  and 
BigBoomPrints
BigBoomPrints797 followers
Follow