inner diameter = 23.5 mm
outer diameter = 60 mm

Emergency STOP Backplate

Emergency_STOP_Flag.3mf

A very simple apple watch charging dock/stand that you can either glue or screw onto a flat surface.

I glued it onto the arm rest of my ikea bed, so that the cable would not fall to the floor and the watch is easy to grab

Apple Watch Flat Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4769026.

My mum loves to knit, but says that her yarn rolls around when she pulls on the string, so i designed these cute bowls, I hope you like them :D 

supports are needed only for the little spiral that would else be printed in the air :)
 

keep in mind that i printed my bowl with 0.35 layer height with a 0.6mm diameter nozzle. The print was about 12 hours, so be prepared for a long print.

 

I would be happy if you would share your prints here on prusaprinters.org :)

Yarn Bowl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3911669.

Here are some files for a diy photobooth i made myself, have fun with it 

DIY Photobooth

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3881084.

i had no place to hang my keys, and did not want to drill, so i designed something that fits onto the intercom

the intercom is 90mm x 240mm

intercom Key Hook

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4683482.

A 2D Model of the stage 0 of bumbo, from the binding of isaac game :D

enjoy

The Binding of Isaac : Bumbo stage 0 | Multimaterial | Multicolor

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3913862.

Here is a small thing to secure a second lack table from ikea, when you want to put them on top of each other. To install, you just have to unscrew the leg a bit, slide the thing in between leg and table an then rescrew the leg onto the table.

leave a comment if you like the design, i'm always open for tipps an questions.

Ben

Ikea Lack Stacker | no Hardware needed

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4636976.

Simpler design, with no such complex geometric shapes, love the original one :D

Soda Stream Bottle Dryer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:2516446.

This is a little Wall mount for a De'Longhi remote coltrole.

De'Longhi Air Conditioner Remote controle mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3316335.

This knob on my table grill broke, when it fell. I designed it, so that it fits perfectly on the shaft, but you may need some superglue, due to printing deviation, or maybe drill it open.

I'd like to get feedback.

I printed it on .15 an with 20% honeycomb infill.

!!! Print it with an heat resistant filament, like PC or high Temperature PLA. !!!



Tepanyaki Table Grill Knob

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

BensPrintLab

Achievements

Seedling