This replaces the small part for the Small Rig Sony a7siii cage where the cage attaches to the side camera strap gromet.

Hardware:

• 1x Hex Bolt (2.5-.45 X 8) This goes through the camera strap attachment, do not over tighten, the screw will cut its own threads, just till snug
• 1x Hex Bolt Tapered (3-.50 X 8) This goes in the tapered hole to screw into the cage

Print Settings: PETG

• Wall count: 4
• Enable Ironing (Iron Highest Layer - UN CHECKED)
• Infill: 100%
• Support - Touching Buildplate