NON-COMMERCIAL - V2 FRAME ONLY
This model will only be available to club members. This is a filament painting of my favorite aspiring King of The Pirates: Monkey D Luffy using 6 colors.
I have included two different 3MF files for Bambu Studio. One for people with AMS unit(s) and one for those without.
[1 AMS/MMU Unit] assign colors 5/6 to slots 1/2 and manually swap out colors 1+2 for 5+6 once 3 starts printing
[2 AMS/MMU Units] assign slots accordingly.
[NO AMS] - preset pauses, manual color changes.
If you do not have Bambu Studio I recommend using it or Orca to look through the settings and copying them to make a Hueforge profile template for yourself in your slicer of choice so that future prints will be quick. A lot of the settings are recommended by the Hueforge team.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The profiles have a height modifier to print the first 0.64mm @ 0.16 layer height as that is the min depth/non blended portion of the black. If you use a different slicer set all your color changes before doing the modifier as it changes the amount of layers. This shaves off approximately half an hour of print time. If you decide to resize this file DO NOT scale the Z dimension or it will fail to blend correctly. If you use different filaments results will vary. If you have Hueforge you can import the STL and see how different filaments will change the outcome before printing. If you have questions hit me up.
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Red Transmission Distance: 1.5 PLA PolyLite Yellow Transmission Distance: 11 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Red At layer #20 (1.68mm) swap to Yellow At layer #25 (2.08mm) swap to Beige At layer #29 (2.4mm) swap to Orange At layer #30 (2.48mm) swap to Ivory White for the rest.