AVAILABLE FOR COMMERCIAL RESALE WITH TIER 2 - V2 FRAME ONLY
The Hero of the Ages - Stained Glass is probably my favorite make of 2023. This model will only be available to club members. It was carefully and meticulously crafted to give a truly beautiful stained glass effect using 6 different colors.
I have included two different 3MF files for Bambu Studio. One for people with AMS unit(s)
[1 AMS/MMU Unit] assign colors 5/6 to slots 1/2 and manually swap out colors 1+2 for 5+6 once 3 starts printing
[2 AMS/MMU Units] assign slots accordingly.
[NO AMS] - preset pauses, manual color changes.
If you do not have Bambu Studio I recommend using it or Orca to look through the settings and copying them to make a Hueforge profile template for yourself in your slicer of choice so that future prints will be quick. A lot of the settings are recommended by the Hueforge team.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The profiles have a height modifier to print the first 0.64mm @ 0.16 layer height as that is the min depth/non blended portion of the black. If you use a different slicer set all your color changes before doing the modifier as it changes the amount of layers. This shaves off approximately half an hour of print time. This one takes a while to slice on my old lappy so bear with it if you are using a slower setup. If you decide to resize this file DO NOT scale the Z dimension or it will fail to blend correctly. If you use different filaments results will vary. If you have Hueforge you can import the STL and see how different filaments will change the outcome before printing. If you have questions hit me up.
Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA PolyLite Blue Transmission Distance: 1 PLA BambuLab Basic BambuLab Green Transmission Distance: 8 PLA PolyLite Yellow Transmission Distance: 11 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Matte Ivory White Transmission Distance: 4 PLA PolyLite Yellow Transmission Distance: 11
Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Blue At layer #15 (1.28mm) swap to BambuLab Green At layer #21 (1.76mm) swap to Yellow At layer #23 (1.92mm) swap to Beige At layer #26 (2.16mm) swap to Ivory White At layer #28 (2.32mm) swap to Yellow for the rest.