TIER 1 - You can print and use this display for retailing your bookmarks.
TIER 2 - You can print and use this display for retailing your bookmarks. You can print the stands and sell them.
This is a retail display stand I made for bookmarks. It can display 12 different bookmarks at the same time and is sized for 60x180mm bookmarks. There is also a space at the front that is recessed 2mm so that you can add a front deco plate which should be 200x50mm. The slots are at a 15 degree angle so the they have better visibility when it is displayed on a standard folding table.
Printing: I printed this on a P1S. The tolerances were a little tight but I just used a rubber mallet and that took care of it. It will not come apart without a lot of force, but that is what I wanted as random people will be manhandling it. You can also print the bookmark holders and the 3 cross braces at ~99% uniform scale if you want the tolerances looser. If you do this make sure to scale your front deco plate by the same value (X/Y only) or it may be too big to for the recessed rectangle.
Frame: Printed at 0.2mm layer height, grid infill @10%
Deco plate: This can be made as a Hueforge or a standard extruded model and printed accordingly. The one in the photo is a Hueforge I made quickly, and I will probably redo it and add the prices underneath the “3D Printed Bookmarks” text.
If you have any questions just ask.