kitchen roll holder

Bazz7777777

Remix Model

Social

Makes

kitchen roll holder - Printed with Black AMZ3D PETG (https://amzn.to/34zKVjM) on Voxelab Aquila.
I printed with a 0.28mm layer height, and 10% infill because I wanted a quick print. Might be tempted to re-print with 15-20% infill but seems ok at 10% and has a bit of flex to allow loading/unloading the kichen rolls. - 3d model

kitchen roll holder - Fitted to the bottom of a kitchen cupboard, just screwed the bracket into the wood. Placed one against the front face and the other at the right distance for a loose hold and so it doesn't need to be bent too much to add/remove the kitchen roll. - 3d model

This model is restricted by licensing terms.

View license.

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3937164.

This is a kitchen roll holder but for the UK size rolls which are a lot smaller, the round part is 38mm, and the arm is 60mm in length so can hold a large roll, as in the picture im using a large plenty roll, printed in petg, very low on usage and both arms print in 2 hours, please post made one, and if you need any allerations let me know, thank you.

1 Likes7 DownloadsOctober 18, 2021

This model is restricted by licensing terms.

View license.