Airi Lamp - minimalistic Design Lamp for 250mm Printbed

Airi is a minimalist table lamp consisting of two parts. Additionally, an E27 lamp socket is required. No gluing is necessary.

The lampshade should be printed in vase mode. I changed the linewidth to 0.6mm on my BambuLab and printed with a 0.4mm nozzle.

The base should be printed with a minimum infill of 40% to give the model some more weight.

For the lampshade, I chose a transparent filament from Jayo, and for the base, matte black PLA from Polymaker.

After printing, both parts are screwed together using the E27 socket, and the designer lamp is ready.

Enjoy printing!