tracking pixel
0 「

B3 Filament Dryer

by
B3zero
Follow
Follow
Remix Model
B3zero
B3zero
|
Image 2 of 2
B3 Filament Dryer 3d model
B3zero
B3zero
|
Image 2 of 2
B3 Filament Dryer 3d model
2D
3D
Makes
B3 Filament Dryer 3d model
B3 Filament Dryer 3d model
This model is restricted by licensing terms. 

Designed a Filament Dryer for 1.75mm 1 Kilogram Spools. The Design is shaped so that a Simple Filament Roller ( https://www.thingiverse.com/thing:6732615 designed by e_grnsmnn ) can fit inside as well as Silica beads in the rear and a Mini Hygrometer in the front. sizing required is 1.87 inches wide by 1.12 inches tall and a depth of 0.57 inches as suppliers rotate. Currently working on getting it just right but this seems to be a pretty stable design. Designed to mount 20mm fan to the front left outside of base. i would also recommend printing a TPU rim to create an airtight seal, those with multi extruders can remix this to achieve that but as i have a CR-10s Pro V2, it isn't something i have experience with. Print the base in Black, and the Top in Transparent for designed aesthetic, will update to allow for Bowden tube to be installed in the filament exit as well. [Updated Base to for fan. i forgot to add an exhaust port. fixed that while keeping the mounts in tact.]


0 Likes1 DownloadsSeptember 2, 2024



0 Likes1 DownloadsSeptember 2, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.2mm

MaterialPLA+
Layer height0.2 mm
Infill density20 %
SupportsGrid
BrimNo