Holiday Spiral Tree

One of three 2023 holiday tree models I've designed this year! Inspired by the spiral tree outdoor lawn decorations.

Model consists of three parts: the body, the base and the topper. No supports are required on any of the three models.

The body is recommended to be printed at 100% infill, at least 2 perimeters. Should be flexible enough after the print to bend/manipulate but use caution on over flexing, especially using mor brittle filaments.

the base should have at least 25% infill and enough perimeters for a solid base/stem.

Topper tolerance should be loose on the top of the stem and can be glued in if needed. The tolerance for the stem should be just enough that the body piece is adjustable but not loose.