Nail_Polish_Bottle.stl Is a demo file meant to show the final product and is not meant to be printed whole. Print out both files seperatly for best results.

Print the Lid with the threads on the bottom of the buildplate and the body with the threads at the top. after printing they should thread together, I did not use a bevel on the male screw so alignment has to be dead on to get it in the hole. maybe I will fix this model but at least now I know for the future. Screw and unscrew lightly and than less lightly to loosen the threads. I printed mine at %50 scale but it should still work at 100% because I made it have enough clearance at that scale.

CC-BY-NC Created By B._.render