Wet Palette (for painting minis)

Wet Palette.stl

Self Watering Plant Pot with Water Level Indicator

sprial_plant_pot.stl

Wavy Bauble - Vase mode

Bauble.stl

LED Fairy Light Diffuser - Spiral

I have a lot of LED lights that I put up at Christmas but they're so bright, it can be quite distracting and uncomfortable to look at so I made these caps that diffuse the light and make them look a little more like traditional fairy light bulbs too.

They friction fit perfectly on the two sets of lights I tried them on but they'll scale up or down just fine if need be.

I printed mine in clear PETG as they were going on coloured lights but they could also be a great way to convert white bulbs to coloured lights if you printed in coloured filament instead.

These are intended to be printed in vase mode so the model is solid - you need to enable vase (spiralise) mode and set bottom layers to 0

Print Fail Tracker

sign.stl

Hidden Carving Pumpkin - Cobwebs

Pumpkin (Cobwebs).stl

Codeblocks Cauldron

For Halloween this year I've been playing around with a fusion of two of my interests - 3D printing and coding!

I use codeblocks to create patterns and the overall shape and then build on that by adding details to create a new spooky model!

This is the cauldron I made - the bowl is generated with code and the details like the feet, brim and handles are added afterwards.

The angles are quite carefully calculated so, while you will need to have your settings well dialled in to avoid stringing etc, it's actually a pretty easy print with no need for supports anywhere other than between the feet as a small area here is raised from the build plate.

I'll be putting pictures in the makes - these were printed in eSun twinkling black PLA :)

I also have a spiral pumpkin I made in a similar way! 
https://thangs.com/m/27028 

Print in Place Chain (plus belt accessories)

All parts in one file - mostly just to show scale

Chain Belt All Parts.stl

Spiral Pumpkin - Halloween Decoration

Pumpkin with Stalk.stl

Desktop Tin Can Trashcan

#flashforge #thangs3d

Upcycle a tin can into something useful!

Great for those little bits of rubbish that gather on your desk or as a novelty pen pot.

If you want a step-by-step on how to assemble, I made an instructable:
https://www.instructables.com/Desktop-Tin-Can-Trashcan/

It fits standard UK cans - I don't know if cans vary around the world but just check before you print. I think it should scale up okay, you just might need to use something other than filament for the hinge if it's made much bigger.

100% Printed Sunglasses

assembly.stl

Holding Child Trinket Tray with Hidden Compartment #CCTMothersDayRemix 

figure.stl

Textured Square Twist Vase.stl

A simple vase with a rippled, bubbly texture

This model is a perfect print for showing off the two tone filaments from 3D Jake, Matterhackers and 3DFilaPrint!

Model in the pictures is printed in 3D Jake's Deep Space PLA

Model is solid and should be printed in vase mode with at least 2 bottom layers. If you want it to hold water, I'd recommend a larger nozzle and more bottom layers.

Tall bowl/pot - intricate facets

Easy to print bowl - no need for supports etc.

Recommended settings:
- 2 perimeters
- 2 bottom layers
- 0 top layers 
- 0% infill

Faceted Dish

Easy print dish - no need for supports

Can be printed in vase mode but for best results I recommend printing with the following settings

0 top layers
2+ bottom layers
0% infill
2+ perimeters

Twisted Facets Vase

Prints fine in vase mode if you want a quick print but for best results recommend printing with the following settings:
- 2-3 perimeters 
- 2-3 bottom layers 
- 0% infill
- 0 top layers

Arkay_Prints

Achievements

Fan Favorite

Sapling

Voyager