Teenage Crystal Lizard - articulated

You'll never believe the story after this design :D Actually, we were in the process of designing a crystal dragon because we used the facial features from our old dragon design. After finishing, we forgot to design the wings and printed it like this.

Only after printing did we realize that it looked like a lizard and thought so... okay we'll keep that, it looks super cool

I hope you like this design :)

thanks for your understanding We currently have some community requests via Discord and we are very happy about that. We try very hard to implement all wishes. There are some requests regarding Amazon speakers and Toniebox, especially on social media. There will definitely be more designs to come, but the wishes of our community take precedence. We are very committed to this here. Since we both work full time, we can only design in the evenings.

EASY PAINTING SYSTEM We have installed easy painting system. This puts an end to annoying painting. All you have to do is click [fill] in the slicer and you can completely color the predetermined areas with one click. This means you can color anything in the color you want in under 30 seconds. Provided your printer has a multi-color printing function.

Some slicers like Simplyfy3D have problems with the easy painting function because they do not support this function. If anyone has problems, just report them in Discord and we will put together a special file for you.

DISCORD We have created a Discord channel for direct support and ongoing projects. If someone has problems, you can request personal help there or the community can also support you if you have problems. We report on ongoing projects. You can also request and contribute ideas. 3D printing is simply more fun together.

The invitation comes immediately with access to our exclusive design.

Print parameters. We recommend:

first layer height 0.16mm (If someone wants something a little finer, then with 0.12) layer height 0.16 mm (If someone wants something a little finer, then with 0.12) Wall lines: 3 Surface pattern: concentric Fill density: 10% Support: no support needed

We also provide a 3MF file with the recommended settings. We created the 3MF file via Bambu Studio. We therefore recommend the 3MF file only for Bambu Studio users

If anyone has problems with slicing, please use the file without the Easy Painting System. As we have discovered, some slicers cannot do anything with this particular setting. Luckily only a few are affected