Snow globe with reindeer in the forest
byAlima Unique Designs
Who's up for Christmas? It's time for a unique design. We invested hours to make this design possible. In this snowball we have depicted a cute reindeer family in the middle of the forest. They stay around peacefully and harmoniously.
The printing time is a little longer because the ball is designed to be a little larger. You are welcome to scale it, but you have to be careful when scaling the ball smaller. If you use a fast printer, the reindeer's legs may break due to the vibration. A scaling of 10 - 20% shouldn't be a problem. Otherwise just print a little slower.
LIGHT SHOW
We provide you with 2 versions. One with a cable hole and one without. This way you can decide what kind of light source you want to use. Cautious. Since the dome is completely closed, I would not recommend any light sources that generate strong heat
This STL file requires some special settings. We recomment:
first layer height 0.16mm layer height 0.16 mm Wall lines: 3 Fill density: at least 8% Fill Pattern: Archimedean Chords (Circle Fill) Support: tree support Wall line support: 2 instead of 1 Support on print surface only Only activate support on critical areas For the professionals among you, you can of course use your settings or adjust our recommended ones. We used these settings and tested them several times. Everything went smoothly. You can also try with less infill so that the light penetrates more.
If someone wants to do the work, there would be x options to paint it individually to make it look even hotter
If you have problems with the settings or need support, let me know in the comments. I will help you as best I can!