We've been looking forward to this design for a long time! It's turned amazing :D
In China, 2024 is the year of the dragon and with this design it fits in perfectly, I would say.
Plus, we haven't had baby dragon for a long time. So it was time. We will also add more baby dragon and general dragons to our portfolio in the future. Just like other designs :)
Unfortunately this time it wasn't possible without support, but we reduced it to a minimum. Further information under Print parameters.
EASY PAINTING SYSTEM We have installed easy painting system. This puts an end to annoying painting. All you have to do is click [fill] in the slicer and you can completely color the predetermined areas with one click. This means you can color anything in the color you want in under 30 seconds. Provided your printer has a multi-color printing function.
Some slicers like Simplyfy3D have problems with the easy painting function because they do not support this function. If anyone has problems, just report them in Discord and we will put together a special file for you.
DISCORD We have created a Discord channel for direct support and ongoing projects. If someone has problems, you can request personal help there or the community can also support you if you have problems. We report on ongoing projects. You can also request and contribute ideas. 3D printing is simply more fun together.
The invitation comes immediately with access to our exclusive design.
Print parameters. We recommend:
- first layer height 0.16mm (If someone wants something a little finer, then with 0.12)
- layer height 0.16 mm (If someone wants something a little finer, then with 0.12)
- Wall lines: 3
- Surface pattern: concentric
- Fill density: 15%
SUPPORT SETTINGS:
Support: yes, normal support
- activate support only on printing plate
- upper interface distance: 0,00mm
- Support object x/y distance 0.5mm
- Threshold angle: 20-30. Attention, with some slicers like Cura you have to enter 70, as this is calculated differently there. Not much support is needed. See photo
If anyone needs support, please just write. We're happy to help :)
We also provide a 3MF file with the recommended settings. We created the 3MF file via Bambu Studio. We therefore recommend the 3MF file only for Bambu Studio users
IMPORTANT If anyone has problems with slicing, please use the file without the Easy Painting System. As we have discovered, some slicers cannot do anything with this particular setting. Luckily only a few are affected