Shoes sizes: EU

Use 0.6mm nozzle, minimum 250x250mm buildplate 

Filaments:

- Recreus Filaflex 82A
- 3DFils TPU 85A -> decrease temp. to 220 °C

Depending on the size, each shoe takes 5 to 8 hours, weights 60 to 90 grams 

I suggest using my print files (gcodes)

How to design and slice: https://www.youtube.com/watch?v=6ae-rzo_zJM

Settings (Cura):

place the model diagonally (45°), with the front and external part facing the user
layer height: 0.36mm
infill line width: 0.4mm
wall line count: 0
top layers: 0
bottom layers: 0
initial bottom layers: 0
infill line distance: 3mm
infill pattern: grid
connect infill lines: yes
infill line direction: []
randomize infill start: yes
infill overlap: 0mm
infill flow: 162%
enable print cooling: no
generate supports: no
initial layer flow: 200%
infill speed: 17mm/s
initial layer speed: 10mm/s
retraction distance: 7mm
retraction speed: 65mm/s
combing mode: off
z hop: 1.2mm
activate fan at the 40th layer counting from the end by writing M106 S84 in the .gcode (30% speed)


settings modifier (300x300x1.1mm solid, placed around Z = 1.7mm, this will make an internal flat top 3 layers platform to place the feet) 

infill pattern: zigzag
infill line distance: 1mm
infill line directions: [30,60,90,120,150,180]
Website: https://www.riverfamily.art/

Contact: alessio@riverfamily.art

LICENSE: Public Domain (https://creativecommons.org/share-your-work/public-domain/cc0/)

Also applies to gcodes, slicing process, pictures, videos and names

Tora shoes

shoes.blend

I recommend downloading the Print Files (gcodes)

Printer requirements:

0.6mm nozzle with at least 200x200x200mm build volume

body.gcode , uphere_body.gcode:

Two versions of Yuki's body, "body.gcode" fits any 120mm pc fan, "uphere_body.gcode" is specific for "Uphere 120mm pc fan". Run a "5V Uphere USB 120mm fan" at up to 12V with a "usb fan speed controller" to get maximum airwflow at low noise. Prints with 170g of PLA in 11h. Ender 3 v2 gives the best outer surface smoothness. Get original Yuki color with "Xightongzhilian silk blue PLA"

cap.gcode:

Prints with 25g of Polipropylene in 1h45m. Apply polypropylene adhesive tape to the heatbed to ensure part adhesion. Tested with Formfutura PP 

icepack.gcode:

Prints with 100g of Polipropylene in 8h. Apply polypropylene adhesive tape to the heatbed to ensure part adhesion. Tested with Formfutura PP 

Website: https://www.riverfamily.art/

Video: https://www.youtube.com/watch?v=TAI5tish3BI

Slicing video: https://youtu.be/3wivfIi9iO4

Contact: alessio@riverfamily.art

LICENSE: Public Domain

https://creativecommons.org/share-your-work/public-domain/cc0/

Yuki Air Cooler

Yuki.SLDPRT

Turning Dado changes the airflow angle

Fits any 80mm, 92mm 120mm, 140mm PC fan

Video: https://www.youtube.com/watch?v=uD2vHHnfa2A

How to slice: https://www.youtube.com/watch?v=9SbpQj1s48o

Download pre-sliced print files (gcodes) for your printer here: http://www.river.family/

Layer height: 0.3mm
Infill line width: 0.6mm
Number of walls (perimeters): 0
Top layers: 0
Bottom layers: 0
Infill density: 21%
Infill pattern: grid
Infill direction: 90°

Any feedback is much appreciated, thank you! :)

Dado Desk Fan

Dado_80mm_Front_1.STL

Fits any 80x80x25mm PC Fan

More info: https://yukiairconditioner.com/

Video: https://www.youtube.com/watch?v=0ZFwxJoSP4c&feature=youtu.be

Download Gcodes for the most common printers: https://river.family/

Pokemon by Herrococo: https://www.thingiverse.com/thing:3020143

Idea by Eltelierworks: https://www.instagram.com/eltelierworks/?igshid=YmMyMTA2M2Y%3D

License: Attribution 4.0 International (CC BY 4.0)



Gengar Air Cooler

Gengar.STL

Fits any 80x80x25mm PC fan

Visit the Website for more info!

https://yukiairconditioner.com/

Video: https://www.youtube.com/watch?v=aUlAm-LH5u4&t=29s

How to slice Yuki: https://www.youtube.com/watch?v=Tb_B_sDHnzw&feature=emb_title

Download gcodes for the most common printers: https://river.family/

Yuki Air Cooler - Mini

Yuki Body Classic.STL

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

Alessio - RIver Family

Achievements

Seedling

Debutant

Tora shoes

Yuki Air Cooler

Dado Desk Fan

Gengar Air Cooler

Yuki Air Cooler - Mini