This is a flash hider/muzzle brake of my own design combining elements from various popular flash hiders found in popular video games.
This has a 14mm CCW thread that allows fitting to airsoft replicas ONLY!!! Any attempts to fit this flash hider/muzzle brake replica to anything other than airsoft replicas will likely result in injury!!!
Along with the main flash hider/muzzle brake there are shim files to allow you to "time" or align to your barrel in the correct orientation, use 1 or several of these in combination to get the best fit. A rubber O-Ring would also suffice.
Please note that none of my files are 100% accurate in any way and are my interpretation of pre-existing designs.
3D PRINTING SETTINGS Material: PLA+ or Stronger however PLA is more than sufficient
Recommended to print vertically without the need for supports.
4 Walls with at least 50% infill
I recommend using adaptive layer height if you can otherwise the finest that your printer can handle.
Tested on a Bambulabs P1P with no fitment issues however if threads seem tight I would recommend the use of a 14mm CCW tap to open them out.