Renault wheel cap

Print them like in the picture, standing. I used pla, but probably something that resists at a higher temperature is better.



hotend support, with Z probe for cr-10 smart

Hotend support v1.3mf

Front Seat Adjustment Knob Wheel Polo 9N

Printed on one side, standing, with supports. Pretty finnichy to find a good orientation where the supports go straight to the part they should support, but the knob works, i still use it after more than a year. I printed it with pla

Protection grill for 40mm hotend fan

The first model was right against the fan but it was laud. 
This version leaves the fan some room

Fan shrowd.3mf

cr-10 Smart hotend fan support

This is for the cr-10 smart printer, it replaces the white plastic between the heatsink and the fan. 
It does not let air to be blown under the heatsink, hitting the hotend. 
And it has a support that anchors on the metal bracket so that the hotend is not pushed down when the filament is extruded.
I used Petg, hope it lasts.

Extruder for Cr-10 Smart.

Base.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

Adelin-95

Achievements

Seedling

Debutant