Free File Friday, 19th of April 2024

Supports: Yes

This mask depending on the scaling is a great gift for kids, dinosaur lovers, furries looking to create a new character, or maybe even an art doll.

...................................................................................................................................................

CAUTION(S)
Teeth can be sharp, sand down before giving to children.

May be a loud toy, consider this before giving to children.

...................................................................................................................................................

Materials needed to complete (wearable)

Print (scaled to your liking)
thin elastic or rubber bands (for hooks on jaw)
thicker elastic (for head strap)
glue (I personally use hot glue)
knife (to score plastic so elastic holds on)
scissors
foamies (Foam sheets) (for chin and padding)

Optional personalization

buckram mesh (for eyes)
fabric of your choosing (for hood)
primer
paint (acrylic)
clay (for custom details; I personally recommend foam clay) (or sculpt in in sculpting software of your choosing)
sandpaper
upholstery foam
duct tape and markers (for patterning)
to scale bust (to make pattern on)
sealant

...................................................................................................................................................

Does not fit
If too large or slides down the face, apply upholstery foam to the forehead (inside) add and subtract till fits properly.

Scaling
I personally scaled to 90%, if you have a scan of your head scale to that instead.

Assembly 
Refer to the video guide to assemble.


...................................................................................................................................................

Q&A
Q: how do I remove teeth
A: If your slicer allows you to "split model into parts", you should be able to delete them

Q: Can I sell this mask as is?
A: no (note: if you see someone selling this mask as is that isn't going by the name "ARCNStoreMicShop" please let me know.)

Q: Can I use this mask to make a commission for customer?
A: Yes, but you must credit me, and the mask will be sold as a collaboration

Dino mask / raptor mask | stl file

topjaw1.stl

FBF(free base friday)

Scale till you get a fit you like, the mask it scaled to fit, but you may want to make it bigger (remember to scale the eyes as well if you plan to print them.)


Hello, I am on a journey to make as many free fursuit bases as I can! I am relatively new to blender so these first few may be a little janky wile I work out the kinks, If you have any issues with this file please let me know so I will be able to avoid those mistakes in the future.

This mask will need to be sanded on the nose and teeth ( though if you put fabric on the nose you won't have to)

You are not aloud to sell this head base as is. If you wish to sell this as a commission you must first

Contact me via one of my linked social media sites
Wait for me to give you my blessing to use the head base for commission
Make sure the buyer is fully aware that I was the one who made the head base
The head base will be treated as a collaboration between me and you :)


Hyper Toony cat fursuit head base

htcat.stl

This eye blank goes to https://thangs.com/mythangs/file/975316

click for more details

toony furrsuit 2d eye blank

Tootheye.stl

Fursuit earring, hoop style


You may use these for commissions, you just need to credit me. You may NOT sell them as is they must be on a suit.


You can print as is, but I recommend scaling to your liking 

This is for fursuits with thin ears, if your fursuit's ears are thick they may  A. Be a struggle to get on B. Not fit at all

Fursuit hoop earring

Fursuit septum piercing 

You may use these for commissions, you just need to credit me. You may NOT sell them as is they must be on a suit.

Scale to fit your fursuit head.
I recommend scaling in terms of the little spheres on the end of the ring

Fursuit nose ring / fursuit septum piercing

FBF(free base Friday)
Nose perfect for septum piercing

You will need to scale to your head
Hello, I am on a journey to make as many free fursuit bases as I can! I am relatively new to blender so these first few may be a little janky wile I work out the kinks, If you have any issues with this file please let me know so I will be able to avoid those mistakes in the future.

This mask will need to be sanded.

You are not aloud to sell this head base as is. If you wish to sell this as a commission you must first

1. Contact me via one of my linked social media sites
2. Wait for me to give you my blessing to use the head base for commission
3. Make sure the buyer is fully aware that I was the one who made the head base
4. The head base will be treated as a collaboration between me and you :)


Sad cat fursuit base

sadcatC.stl

!!Updated!!

I recommend printing these before making the ears to insure the best fit.

Scaled to fit 1 inch foam

Edit the Stud piece with your own design if wanted, or paint to your liking 

You may use these for commissions, you just need to credit me. You may NOT sell them as is they must be on a suit.

Fursuit earring studs (customizable)

out.stl

You can customize the little cylinder at the bottom to your liking 

I recommend painting either silver or gold, 

You may use these for commissions, you just need to credit me. You may NOT sell them as is they must be on a suit.

Fursuit earring hook (customizable)

earinghook.stl

FBF(free base Friday)

!!EYE UPDATE!!
I have created a 2D eye blank for this fursuit head, I am new to this so I recommend turning on supports just in case, if you choose to scale the head be sure to scale the eyes with the same percentage. 

To download the eye click here...      https://thangs.com/mythangs/file/995947
Nose perfect for septum piercing

You MAY need to scale to your head, but is not necessary

Hello, I am on a journey to make as many free fursuit bases as I can! I am relatively new to blender so these first few may be a little janky wile I work out the kinks, If you have any issues with this file please let me know so I will be able to avoid those mistakes in the future.

This mask will need to be sanded on the nose and teeth ( though if you put fabric on the nose you won't have to)





You are not aloud to sell this head base as is. If you wish to sell this as a commission you must first
1. Contact me via one of my linked social media sites
2. Wait for me to give you my blessing to use the head base for commission
3. Make sure the buyer is fully aware that I was the one who made the head base
4. The head base will be treated as a collaboration between me and you :)

Toony fursuit head base (sharp tooth)

ToothGuyA.stl

Hello! this is my first upload; I would like constructive criticism so I can improve my modeling skills. 

You may need to scale the model if you have a bigger/smaller head than average.

You are not aloud to sell this head base as is. If you wish to sell this as a commission you must first
1. Contact me via one of my linked social media sites
2. Wait for me to give you my blessing to use the head base for commission
3. Make sure the buyer is fully aware that I was the one who made the head base
4. The head base will be treated as a collaboration between me and you :)

kemono x toony head base

kemonoface1.0 .obj

dinobottomj.stl

Kinda a newbie maker, but I want to share what I make

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

A_reallycoolname

Achievements

Seedling

Up and Coming

Pinned models

Toony fursuit head base (sharp tooth)

Dino mask / raptor mask | stl file

Dino mask / raptor mask | stl file

Hyper Toony cat fursuit head base

toony furrsuit 2d eye blank

Fursuit hoop earring

Fursuit nose ring / fursuit septum piercing

Sad cat fursuit base

Fursuit earring studs (customizable)

Fursuit earring hook (customizable)

Toony fursuit head base (sharp tooth)

kemono x toony head base