Disturbed Sound of Silence HueForge

Fan art for Disturbed's cover of Sound of Silence. Created using HueForge.

Print Settings Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used: ABS BambuLab Black Transmission Distance: 0.3 ABS Sunlu Medium Grey Transmission Distance: 2 ABS Amazon Basics Light Grey Transmission Distance: 3 ABS HatchBox White Transmission Distance: 5.5

Swap Instructions: Black until layer #7 at 0.4mm Medium Grey until layer #8 at 0.44mm Light Grey until layer #12 at 0.6mm White for the rest.