Well, hello there, sugar! Welcome to AFO3D’s **CANDY SHOP**!  Oh, we’ve got the sweetest little treats, all made with love and a touch of magic from our 3D printers. But **don't eat** them or your teeth will definetly fall off!!

CANDY SHOP

**Welcome to my Candy Shop!!**

This is the Sixth little one from my Candy Shop collection.

Enjoy printing this little candy characters and collect them all!!

**3D files avaliable:**
- BLUEREDBERRIES

**SHARE YOUR PRINTS!!**

**Follow me on:**

Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D

**Licensing**
All my designs are non-commercial and may not be sold , reproduced, or shared outside of this website.
If you wish to sell any of them you must subscribe to my Thangs.com or Printables.com Commercial membership plans.

**Reccomended Print Settings:**
- Gyroid
- 0.2mm layer height
- 7% infill

-AFO

MINI CANDY BERRIES

BLUEREDBERRIES.stl

**Welcome to my Candy Shop!!**

This is the Fifth little one from my Candy Shop collection.

Enjoy printing this little candy characters and collect them all!!

**3D files avaliable:**
- Brick

SHARE YOUR PRINTS!!

**Follow me on:**

Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D

**Licensing**
All my designs are non-commercial and may not be sold , reproduced, or shared outside of this website.
If you wish to sell any of them you must subscribe to my Thangs.com or Printables.com Commercial membership plans.

**Reccomended Print Settings:**

- Gyroid
- 0.2mm layer height
- 7% infill

-AFO



MINI CANDY BRICK

BRICK.stl

**Welcome to my Candy Shop!!**

This is the Fourth little one from my Candy Shop collection. 

Enjoy printing this little candy characters and collect them all!!

**3D files avaliable:**

- Licorice Curved
- Licorice

**SHARE YOUR PRINTS!!**

**Follow me on:**

Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D

**Licensing**
All my designs are non-commercial and may not be sold , reproduced, or shared outside of this website.
If you wish to sell any of them you must subscribe to my Thangs.com or Printables.com Commercial membership plans.

**Reccomended Print Settings:**
- Gyroid
- 0.2mm layer height 
- 7% infill



-AFO

MINI LICORICE CANDY

LICORICE CURVED.stl

**Welcome to my Candy Shop!!**

This is the third little one from my Candy Shop collection. This one has tinny hidden legs too !!

Enjoy printing this little candy characters and collect them all!!

**3D files avaliable:**

- Corn with legs
- Corn
- Corn with legs and no mouth

**SHARE YOUR PRINTS!!**

**Follow me on:**

Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D

**Licensing**
All my designs are non-commercial and may not be sold , reproduced, or shared outside of this website.
If you wish to sell any of them you must subscribe to my Thangs.com or Printables.com Commercial membership plans.

**Reccomended Print Settings:**
- Gyroid
- 0.2mm layer height
- 7% infill



-AFO

MINI CANDY CORN 

CORN WITH LEGS.stl

**Welcome to my Candy Shop!!**

This is the second little one from my Candy Shop collection. **This one has tinny hidden legs !!**

Enjoy printing this little candy characters and collect them all!!

**3D files avaliable:**
- Watermelon
- Watermelon mini
- Watermelon with legs
- Watermelon with legs and no mouth

**SHARE YOUR PRINTS!!**

**Follow me on:**

Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D

**Licensing**
All my designs are non-commercial and may **not be sold** , reproduced, or shared outside of this website.
If you wish to sell any of them you must subscribe to my Thangs.com or Printables.com Commercial membership plans.

**Reccomended Print Settings:**
- Gyroid
- 0.2mm layer height
- 7% infill
- Fuzzy Skin

-AFO

MINI WATERMELON CANDY

WATERMELON_LEGS.stl

**Welcome to my Candy Shop!!**

This is the first little one from my **Candy Shop** collection. This model will always be avaliable for free. Enjoy printing this little candy characters and collect them all!!

Stay tuned because the full collection is coming un soon!!

**SHARE YOUR PRINTS!!**

**Follow me on:**

Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D

 

**Licensing**
All my designs are non-commercial and may ** not be sold** , reproduced, or shared outside of this website.
If you wish to sell any of them you must subscribe to my Thangs.com or Printables.com Commercial membership plans.
 

**Reccomended Print Settings:**

- Gyroid
- 0.2mm layer height
- 7% infill
 

-AFO

KISTWISTER CANDY 

KISTWISTER.3mf

**Test your Dog's intelligence with this toy!!
Share your prints!**

This is the new version of this toy that I designed back on 2017 for my dog, this is in her honor.

**Instructions:**
You put your dog's favourite treats on a few of the holes and cover them up with the corresponding shape, give it to them and let them figure it out by themselves. They will smell and discover how to master this toy, some quicker than others.

You can use 20mm diameter rubber pads to make it stop sliding
 

 

**Follow me on:**
Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D

 
**Licensing**
All my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.
If you wish to sell any of them you must subscribe to my Thangs.com or Printables.com Commercial membership plans.

-AFO

DOG INTELIGENCE TOY

DOG+INTELIGENCE+TOY.3mf

**Pull the pin and throw them fast, they will explode!!
Transform your Water Balloons in Water Grenades
Share your prints!!**

**INSTRUCTIONS:**
Intoduce the tip of the balloon and clip it in, then secure it with the pin.

You can use a spring from any kind of pen to make the latch fly off when thrown and to ensure the balloon is released. 

MAX spring diameter 5mm (Maybe you will need to cut the spring to length)
 
**Follow me on:**

Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D

 

**Licensing**
All my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.
If you wish to sell any of them you must subscribe to my Thangs.com or Printables.com
Commercial membership plans.

-AFO

BALLOON GRENADE

BALLOON_GRENADE.3mf

Here you shall find all my gadgets, I hope they serve you well!!

GADGET SHOP

**PRINT-IN-PLACE HAR CLAW CLIP**

This is the perfect gift for your mom this Mother's Day, it's not a remix, it's a complete redesign from my previous hair clip. It works better and the smaller version prints great.
 
**FOR THE LARGE MODEL YOU NEED TO REMOVE THE INCLUDED SUPPORTS WITH THE HELP OF A CUTTING BLADE**

THE SMALL ONE JUST NEEDS A CLEAN UP



**Follow me on:**

Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D

 
**Reccomended Print Settings:**
Filament: PETG (don't use PLA)
Layer Height: 0.20
Infill: 100%
Support: On buildplate only
 
-AFO

HAIR CLAW CLIP (REDESIGN)

HAIR CLAW CLIP REDESIGN LARGE.stl

**Use your 0.2 mm Nozzle to print a small chess game and have some fun playing against ANTS.**

 
**THERE IS TWO VERSIONS:**

THE BIGGER version uses BIGGER MAGNETS: 4mm x 2mm (96 magnets needed)

**LINK FOR THE 4mm x 2mm MAGNETS**:
https://amzn.to/3Jn1uka

(this is an affiliate link i would appreciate if you use it TY)


THE SMALLER version uses SMALLER MAGNETS: 2mm x 1mm (96 magnets needed)

**LINK FOR THE 2mm x 1mm MAGNETS:**

https://amzn.to/3xE1R7n

(this is an affiliate link i would appreciate if you use it TY)

 

**You can play using this tweezers:**
https://makerworld.com/en/models/433868#profileId-338654



**YOU HAVE THREE OPTIONS FOR THE MAGNETS:**

1.NOT USING THEM (EASY)
2.GLUING THEM AFTERWARDS
03.EMBEDDING THEM MID-PRINT


**Follow me on:**

Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D


Reccomended Print Settings:
- Multicolor
- 0.2mm Nozzle
- Brim
 

 

- AFO


MINI CHESS GAME

CHESS+BOARD+EMBEDDED+MAGNETS(3).3mf

**The best gift for your mom it's the memories that you have with her, memories are freezed in time by photograpy, this gift captures the images in a little film keychain.**

Customize the photos and print the film in the [this video.](https://www.canva.com/design/DAGDu152i7U/hTfYTWck00zAbRB0bmSYlQ/view?utm_content=DAGDu152i7U&utm_campaign=designshare&utm_medium=link&utm_source=publishsharelink&mode=preview)

 

**Follow me on:**
Instagram: https://www.instagram.com/afo3d/

TikTok: https://www.tiktok.com/@afo3d

Youtube: https://www.youtube.com/@AFO3D


**Reccomended Print Settings:**
- Brim
 

-AFO

PHOTO FILM KEYCHAIN

KODAK+PHOTO+FILM+ROLL.3mf

**KEEP YOUR MOST VALUABLE THINGS HIDDEN WHILE YOU TAKE A DIP INTO THE SEA.**

It includes an AirTag compartment so you can bury it and find it with ease and a little print-in-place handle to carry it.


**NEW VERSION IMPROVEMENTS:**
- LOCKER KEY FOR EXTRA SECURITY.
- NO THREADS  (sand gets stuck and blocks them sometimes)
- BETTER AIRTAG LOCKING CAP
- PRINT IN PLACE
- STRONGER HANDLE
 - BIGGER AND POINTIER
- Share your prints!!

(ASA or ABS is recommended)

 

It's recommended to use the print profile provided, supports are already in place and tolerances tested.
Assembly:
I used this 16mm locker key: https://amzn.to/4drbgi3
(This is an affiliate link)


1. INESRT THE SAND SHIELD ON THE LOCKER KEY
2. TIGHTEN THE LOCKER KEY FROM THE OTHER SIDE WITH THE NUT
3. ALIGN THE METAL LATCH AND TIGHTEN THE SCREW THE LATCH NEEDS TO BE ALIGNED WITH THE KEY LIKE SHOWN, TO LOCK IN PLACE.
4. AND YOU ARE DONE!
 
Maybe you will need to help the cap come loose with some plyers.

**Follow me on:**
Instagram: https://www.instagram.com/afo3d/
TikTok: https://www.tiktok.com/@afo3d
Youtube: https://www.youtube.com/@AFO3D


**Licensing**
All my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.
If you wish to sell this model print, subscribe to my thangs commercial license.

-AFO

SAND SAFE 2 (With Keys and AirTag)

SAND SAFE.stl

📥 **Unlimited** Model downloads / month
💲 **UNLIMITED Commercial License**
📂 **3MF Files** for Bambu Lab printers. (Print it just like me!)
ᴠɪᴘ  **Exclusive 3D models**
🌐 **Discord Access** (Coming Soon)

There is **NO LIMIT**, download as much as you can! With the **commercial license** you can **SELL** your prints for a profit!!

(UNLIMITED Commercial License allows you to **SELL** any of my designs Public or Paid)

**Selling and or Distributing any of the files avaliable on Thangs is strictly prohibited and are protected by intellectual property rights and remain the exclusive property of AFO3D.**

Select **Annual billing** for **25% off**

AFEW DISTRIBUTOR

📥 **20** Model downloads / month
💲 **LIMITED Commercial License**
📂 **3MF Files** for Bambu Lab printers. (Print it just like me!)

Choose **20** models to print every month! With the **limited commercial license** you can **SELL** your prints for a profit!! 

(_LIMITED Commercial License_  **ONLY** allows you to sell all the **PUBLIC** models, the membership ones are only for **PERSONAL USE**)



**Selling and or Distributing any of the files avaliable on Thangs is strictly prohibited and are protected by intellectual property rights and remain the exclusive property of AFO3D.**

Select **Annual billing** for **30% off**

AFEW SELLER

📥 **6** Model downloads / month
Choose **6** models to print every month!

**Selling and or Distributing any of the files avaliable on Thangs is strictly prohibited  and are protected by intellectual property rights and remain the exclusive property of AFO3D.**

Select **Annual billing** for **20% off**

AFO3D

Achievements

Seedling

Debutant

Pinned models

SAND SAFE 2 (With Keys and AirTag)

PHOTO FILM KEYCHAIN

KISTWISTER CANDY

MINI CANDY CORN

CANDY SHOP

MINI CANDY BERRIES

MINI CANDY BRICK

MINI LICORICE CANDY

MINI CANDY CORN

MINI WATERMELON CANDY

KISTWISTER CANDY

DOG INTELIGENCE TOY

BALLOON GRENADE

GADGET SHOP

HAIR CLAW CLIP (REDESIGN)

MINI CHESS GAME

PHOTO FILM KEYCHAIN

SAND SAFE 2 (With Keys and AirTag)