All gridfinity basic bins, starting with 1x1x1 up to 12x12x12. I included the 3 different versions each size and lids. So there are over 4.5k files, so everyone should find the perfect bin.

These bins don't have magnet/screw holes. As long they are used for Drawers or non-moving places you don't need them.

-   no labeling tab
-   labeling tab on the left side
-   labeling tab on the right side 

The generated 3mf-files are all based on this [openSCAD rebuild](https://github.com/kennetek/gridfinity-rebuilt-openscad). I'm using them a lot, they work as intended, easy to print.

**Other Tools used:**

All files are generated with the help of a modded version of [OpenSCAD-Bulk-Export](https://github.com/OutwardBuckle/OpenSCAD-Bulk-Export). Check out this git if your interested in bulk-exporting from OpenSCAD

**Printing:**

Print it in any material you like. For most applications PLA is good enough. Some slicer recommend a brim. With a bit of glue or a good PEI sheet it doesn't move. If the bin is to big for your printbed, use the split function.

**Files:**
 I uploaded them in several batches. So you can download 1x-group separat. You'll find them at the bottom (Other Files).

**Share your makes and support me**

If you like my work, you can [support me here](https://brickbank.app/support/), via [Ko-Fi](https://ko-fi.com/brickbankapp) or [Patreon](https://patreon.com/brickbankAPP). Please leave a comment or share your makes 😁\
If your interested in selling the printed models DM me.

01x01x00_div-1x1_left-tab_s-0_no-holes.3MF

01x01x00_div-1x1_right-tab_s-0_no-holes.3MF

On May the 4th this Logo was released officially! Every Star Wars Fan who bought an certain amount of Star Wars Sets, got a paper-bag with this Logo instead. The letter L E G O in the aurebesh alphabet with the famous brick designe. On eBay the bags are sold for hundreds of euros. I have one, so i started recreating it as a Light box.

The print file is set up, so you just have to load the correct colors and press print.

**FEATURES**

-   Printed LED guide for up to 10mm width.
-   The LEDs can go in and out directly in the base
-   The base ca be secured with self adhesive door bumper
-   Common USB-C socket can be used to power the light box
-   nice looking light box!

**RECOMMENDATION**

**For Material**
go with the one you like. I used PLA:

-   for black: [Bambu Basic PLA](https://eu.store.bambulab.com/products/pla-basic-filament) or [Sunlu PLA+](https://www.sunlu.com/de/collections/pla-plus-fliament?sca_ref=5433978.77lX3k2KvV&sca_source=mw)*
-   for red: [Sunlu PLA+](https://www.sunlu.com/de/collections/pla-plus-fliament?sca_ref=5433978.77lX3k2KvV&sca_source=mw)* red
-   for yellow: [Sunlu PLA+ pure yellow](https://amzn.to/4aqh6y7)* (rare color)
-   for white: [Bambus Matte PLA](https://eu.store.bambulab.com/products/pla-matte-filament)

**For LEDs**
There are so many. I made 2 boxes. One with programmable RGB LEDs + ESP32 and one with pure cold white COB LEDs. Both running on 5V via USB-C. If soldering isn't really your thing, you can use the LED set from Bambulab. It includes everything you need, including a remote control.

-   COB LED i used: BTF COB LED cold white [Amazon](https://amzn.to/4dIgqqT)* | [AliExpress](https://s.click.aliexpress.com/e/_DB5h8MT)*\
-   RBG LED i used: BTF WS2812 ECO 60pix/m [Amazon](https://amzn.to/44LOsGu)* | [AliExpress](https://s.click.aliexpress.com/e/_DCtUCbv)*

**PRINTING**

There are 3 plates you need to print. Starting with plate 1 and plate 2, these are the essential part of the whole thing. Plate 1 is the Logo with the box walls. be careful and clean nozzle an print bed before starting the print. Plate 2 is straight forward to print, its just the lid/back plate of the box.

Plate 1 and 2 are the light box and lid. For the base you can choose between 2 variants.

Basically the whole difference is the size and form of the hole in the back.

Plate 3a is designed to fit an USB-C socket. You can get it from [Amazon](https://amzn.to/3QMOI2r)*, AliExpress ([here](https://s.click.aliexpress.com/e/_Dd3gBE7)* or [here](https://s.click.aliexpress.com/e/_Dm1xQJ1)*) or anywhere else.

Plate 3b is designed just to fit the power cable

**BILL OF MATERIALS**

-   You'll need ~70cm of any LED strip light you like with a power source of choice
-   a bit of aluminum foil with a glue-stick or [aluminium tape](https://amzn.to/4butij2)*

Optional:

-   USB-C socket. You can get it from [Amazon](https://amzn.to/3QMOI2r)*, AliExpress ([here](https://s.click.aliexpress.com/e/_Dd3gBE7)* or [here](https://s.click.aliexpress.com/e/_Dm1xQJ1)*) or anywhere else.
-   superglue (if you want to permanently seal the box)
-   self adhesive door bumper (~8mm). You can get it from [Amazon](https://amzn.to/4alalOc)*, [AliExpress](https://s.click.aliexpress.com/e/_DkBbUaP)*, i use the Ikea spare parts for that
-   Microcontroller like an basic ESP32.

**ASSEMBLY**

**Step 1**
Guide the LED stripe and/or power cable trough the holes in the back part of the base. If you don't have to solder anything you can put the base together. I should press-fit. Be gentle! This step can be skipped if you're sure.

**Step 2**
glue the LED strip in place. Use the guide to align the LED stripe parallel to the edge.

**Step 3**
Now its time to test the LEDs if they work.

**Step 4**
Let's prepare the lid. I recommend to cover the inner part of it with aluminum foil or tape. This reflects the light and achieves an even light distribution.

-   You'll need the lid, a gluestick an aluminum foil
-   apply the glue
-   pay attention, which side is matte and which on is shiny. You want the shiny one to reflect.#
-   press firmly
-   let it dry a bit
-   use a sharp knife or your fingernail to cut it around the inner edge

**Step 5**
If everything works fine, put the lid in place, check if everything works (yes again, better save than sorry). now glue the base and lid to the box.

**Step 6**
Have fun!

**3D PRINTING SETTINGS**
_Bambu Studio or Orca Slicer.3mf:_
As described, youll need an 3D Printer with multi-material support. If youre using an Bambulab printer with AMS, use the provided Studi file.

_lightbox.3mf_
Is for PrusaSlicer an set up for an Prusa XL with toolchanger. You just need to adjust your material and printsettings.
Try to go from light to dark.

no support needed!

**SHARE YOUR MAKES AND SUPPORT ME**

If you like my work, you can [support me here](https://brickbank.app/support/), via [Ko-Fi](https://ko-fi.com/brickbankapp) or [Patreon](https://patreon.com/brickbankAPP). Please leave a comment or share your makes 😁.

**) when you use this link and buy something, I earn a small commission in return. You don't have to pay anything extra and support my work.*\\
I appreciate your support!

If your interested in selling the printed models DM me.



AUREBESH BRICK LOGO LIGHT BOX

Bambu Studio or Orca Slicer file.3mf

Hobby programmer, CAD Designer and AFOL

[3D-Printing Wiki](https://docs.brickbank.app/en/stuff/3D-Druck)

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ABDELat

01x01x00_div-1x1_left-tab_s-0_no-holes.3MF

AUREBESH BRICK LOGO LIGHT BOX