tracking pixel
3D Printing World

Collapsing Dice Tower

by
3dprintingworld
Follow
Follow
Remix Model
3dprintingworld
3dprintingworld
|
Image 1 of 16
Collapsing Dice Tower 3d model
3dprintingworld
3dprintingworld
|
Image 1 of 16
Collapsing Dice Tower 3d model
2D
3D
Makes
Collapsing Dice Tower 3d model
Collapsing Dice Tower 3d model
Collapsing Dice Tower 3d model
Collapsing Dice Tower 3d model
Collapsing Dice Tower - artifacts on top of door inside - 3d model
Collapsing Dice Tower - extended dice tower in pla marble - 3d model
Collapsing Dice Tower - artifacts on top of door - 3d model
Collapsing Dice Tower 3d model
Collapsing Dice Tower 3d model
Collapsing Dice Tower 3d model
Collapsing Dice Tower 3d model
Collapsing Dice Tower 3d model
Collapsing Dice Tower - 9H 51m  looks great - 3d model
Collapsing Dice Tower 3d model
Collapsing Dice Tower - Almost great... - 3d model
Collapsing Dice Tower 3d model
This model is restricted by licensing terms. 

This dice tower prints-in-place in the retracted position with no supports but after printing it extends to three times its original height. The drawbridge opens to allow the dice through, but a detent keeps it closed when traveling. The funnel on top and the angle on the bottom mixes the die and makes sure they exit the tower every roll. There is a button on the bottom that locks the tower in position so it wont accidently extended. There is compartment on the bottom for storing dies with a built in catch on the lid.

It is designed to be printed with a .4mm nozzle. The walls are four shells thick, two shells are used for the brick inlay.

Note: if your tower does not extend all the way, pull it apart until you have the desired extension and leave it for a day or two. The plastic will eventually "creep" and you will eventually get the perfect fit.

Printed on the Muldex rep-rap IDEX printer


Having troubles printing or want to show off your prints? Join our Facebook Group.


442 Likes443 DownloadsMay 20, 2023


442 Likes443 DownloadsMay 20, 2023
This model is restricted by licensing terms.