3dprintbunny

A 3d print designer, artist and enthusiast. I love experimenting with 3d print techniques.

Want to support me? Save 25% on Supporter and Commercial membership using the code 3DPB25

Select a membership plan

Monthly billing

Annual billing

17% off

Supporter Plus

$8.33

/ month

when billed annually

This supporter plus plan gives you:

A MASSIVE thank you for your support
Access to a small library of exclusive designs including my Hot Air Balloon and Carousel designs
One new exclusive design monthly
Opportunity to suggest and request new designs
Advice and support

Immediate access. Cancel anytime.

17% off

Commercial Print & Sell

$9.96

/ month

when billed annually

This membership plan gives you the right to print and sell any of the 3DPrintBunny designs available for download on the Thangs website, for the duration of your membership.

You also get:

Access to a small library of exclusive designs including my Hot Air Balloon and Carousel designs
One new exclusive design monthly

this membership does not permit the use of any 3DPrintBunny design to promote products other than the design itself*

Immediate access. Cancel anytime.The models in this plan are restricted by licensing terms. View License.

Printer Health Check - quick print torture test

3dprintbunny

Remix Model

Social

Become a member

Makes

Printer Health Check - quick print torture test 3d model

Printer Health Check - quick print torture test - A nice multifaceted printer test :)

Dialing in a .6 nozzle on a CR-10 S5. Not a bad start, but still needs tinkering.

Thank you for sharing! - 3d model

Printer Health Check - quick print torture test - Voron 2.4 - ABS - 0.2mm layer height. - 3d model

Printer Health Check - quick print torture test - ABS on a sovol sv06. a positive audition - 3d model

This model is restricted by licensing terms.

View license.

This is a quick print printer health check. It takes just over half an hour to print. It has overhangs, holes, curved recesses, strings, posts, thin walls and surface details and part of the base is one layer thick so that you can check first layer quality.

Print at 0.3mm layer height with the 'print thin lines' box checked

Categories:

575 Likes1.9K DownloadsApril 18, 2022

This model is restricted by licensing terms.

View license.