A large string Eiffel Tower that stands at approximately 70cm tall and is printed in parts.
I have attached the stls and the Bambu Lab 3mfs and have added some instructions below. The pieces need to be glued together.
If you would like to print it and have any concerns or issues just drop me a message on social media. :)
All pieces need to be printed at 0.3mm layer height (if you are using Bambu Studio you need to set your wall generator to Arachne). For Level 5 and Top you need to use supports touching buildplate.
You need to print the following
4 x Base 4 x Level 2 4 x Level 3 1 x Level 4 4 x Level 5 1 x Top
Optional: I set my top layer to Hilbert Curve to give extra texture.
138 Likes85 DownloadsDecember 9, 2023