Hanging Cat Ornament

2.3K downloads · 3 years ago · A cat climbing the windowblinds Print at 0.3mm layer height If using Bambu Studio set the wall gen

This model is restricted by licensing terms.

View license.

Description

A cat climbing the windowblinds

Print at 0.3mm layer height

If using Bambu Studio set the wall generator to Arachne

If using Cura make sure 'print thin walls' is checked.

Print the first 4 layers in white then swap to black for the rest of the print

This ornament can be paired with my Peeking Dog which you can download here: https://than.gs/m/945314

Tags:

Community Makes (7)

Great model. Printed on Bambu Lab X1c. Had the bridge line break in a spot or two. Checked the box for 'wide bridge' and the problem went away. Could have been the filament I used also. Great conversation model, especially if you ever had cats or dogs. Thanks!

E3P using Cura slicer
sitting on dark background

Wife and I have three cats, all of them problem children in one way or another, so I figured she'd appreciate this. Printed on Bambu X1C using SUNLU black and white PLA.

Bambu A1 mini Bambu PLA White, Orange, Beige, and Bambu PLA Matte Dark Blue. Both are cats are Orange and well yes sometimes get into the blinds :)

Thought I would get a little creative with the painting 😊

I need to dial in my settings a bit. And remember to change filament!

Community Makes (7)

Discussions

CGorecki Designs2 years ago

drewski3562 years ago

Great model. Printed on Bambu Lab X1c. Had the bridge line break in a spot or two. Checked the box for 'wide bridge' and the problem went away. Could have been the filament I used also. Great conversation model, especially if you ever had cats or dogs. Thanks!