tracking pixel
Natalie C

F1 Tracks Car - sculpted

by
3dprintbunny
Follow
Follow
Remix Model
3dprintbunny
3dprintbunny
|
Image 5 of 7
F1 Tracks Car - sculpted 3d model
3dprintbunny
3dprintbunny
|
Image 5 of 7
F1 Tracks Car - sculpted 3d model
2D
3D
Makes
F1 Tracks Car - sculpted 3d model
F1 Tracks Car - sculpted 3d model
F1 Tracks Car - sculpted 3d model
F1 Tracks Car - sculpted 3d model
F1 Tracks Car - sculpted 3d model
F1 Tracks Car - sculpted 3d model
F1 Tracks Car - sculpted - Printed on my Artillery Sidewinder X1 at 125% scale and 20hours to print at a .2mm layer height. I was using some random color changing silk PLA by Isanmate and I am pretty happy how it turned out. Thanks for the great model, awesome job.  - 3d model
This model is restricted by licensing terms. 

This is a sculpted 3d Formula One Car created using the 24 tracks of the 2024 F1 season.

I used the picture of the F1 car made out of tracks that I used for the previous F1 artwork but instead of layering the tracks I decided to mould them into a 3d sculpture of an F1 car.

To print you need to have supports touching buildplate. I also used a brim (brim-object gap set at 0.25mm) to make sure none of the pieces popped off the buildplate whilst printing.

The filament is the new BambuLab Galaxy Purple PLA.

Filament link: https://shareasale.com/r.cfm?b=2282157&u=3772708&m=138211&urllink=&afftrack=


54 Likes50 DownloadsMarch 21, 2024


54 Likes50 DownloadsMarch 21, 2024
This model is restricted by licensing terms.