Trashcan 'Wave'

I designed my own trashcan to collect my 3D print waste. It consists of two parts. Glue the two parts together with some (transparent!) glue and you have a multicolor trash can if you print it like i did. You can also try to print it in other colors, even non transparent.

🎞First video: https://youtu.be/CJGnZsBCzm0 🎞Second video: https://youtu.be/cVQ-OWQv0S0

⚠ Usage of any models from 3DParts4U will be at your own risk!

⚙ My PLA Simplify3D print settings:

• 3600mm/minute (60mm/second) (vase mode)
• hotend 185°C | bed 50°C
• 250 micron | infill 20%
• 0 top layers | 5 bottom layers | 1 outline layer
• brass nozzle 0.35mm
• extrusion width 0.44mm
• retraction 1.00mm
• extrusion multiplier 0.95
• coasting 0.30mm
• wipe distance off
• fan 75%
• no support needed