This model is restricted by licensing terms.
View license.
2 Likes10 DownloadsMarch 6, 2022
This model is restricted by licensing terms.
View license.
I designed this endless filament spool holder in FreeCAD! It consists of three different parts: a rod, connector and a stand. By connecting them to each other, you can create a very long spool holder!
🎞 Long video: https://youtu.be/p2gAiy2ZMls ⚡ Short video: https://youtu.be/28zktCzvBWE
⚠ Usage of any models from 3DParts4U will be at your own risk!
⚙ My PLA Simplify3D print settings:
- 3600mm/minute (60mm/second)
- hotend 185°C | bed 50°C
- 250 micron | infill 15%
- 3 top layers | 3 bottom layers | 3 outline layers
- brass nozzle 0.35mm
- extrusion width 0.44mm
- retraction 1.00mm
- extrusion multiplier 0.95
- coasting 0.30mm
- wipe distance off
- fan 75%
- only support with the connectors
Categories:
2 Likes10 DownloadsMarch 6, 2022
This model is restricted by licensing terms.
View license.
2 Likes10 DownloadsMarch 6, 2022
This model is restricted by licensing terms.
View license.