1:8 BTTF DeLorean Flux Pipes Set
This set contains the two pipes on top of the Flux capacitor. Both pipes were created using the exact specifications of the real pipes on the original A-car DeLorean Time Machine in order to achieve perfect 1:8 scale replica's of those pipes . This set is specifically designed for the 1:8 scale Back to the Future Delorean model.
Small pipe This pipe is a replacement for the incorrect stock pipe 58D from issue 58. The sprue, indicated in red, has to be removed.
Assembly There's a pin on the back of the pipe that has the same diameter as the one on the stock part, so you can just insert it into the dedicated hole on the bulkhead and it will stay in place. Pay attention, when removing the sprue, indicated in red in the picture above, to not accidentally remove the pin .
Big pipe This pipe is a replacement for the inaccurate stock pipe 58E from issue 58. Notice that this pipe even has the round mold injection mark on the front side just like the original one.
Assembly After removing the sprue, you can glue it in place by using two drops on super glue by using a toothpicker.
1:8 BTTF DeLorean Flux Pipes Set
1:8 BTTF DeLorean Exhaust pipes
1:8 BTTF DeLorean interior bulkhead set
1:8 BTTF DeLorean Bailout Bottle and Compass Plug
1:8 BTTF DeLorean Flux Capacitor WITH gasket
1:8 BTTF DeLorean Overhead console
1:8 BTTF DeLorean Hockey Puck parts
1:8 BTTF DeLorean WHE / TFG
1:8 BTTF DeLorean Front Flux boxes withOUT screws
1:8 BTTF DeLorean Flux Capacitor withOUT gasket
1:8 BTTF DeLorean Cannons set
1:8 BTTF DeLorean Blue capacitors
1:8 BTTF DeLorean Speedometer
1:8 BTTF DeLorean Central Console Set
1:8 BTTF DeLorean Flux Bands Brackets Set
1:8 BTTF DeLorean Dashboard Set
1:8 BTTF DeLorean plutonium case latches
1:8 BTTF DeLorean Dashboard Wires Terminal
1:8 BTTF DeLorean Wire Trunks
1:8 BTTF DeLorean door lamp lens set of 6
