tracking pixel
Jake

Giga GyroHex Spinner.stl

by
3Digiprints
Follow
Follow
Remix Model
3Digiprints
3Digiprints
|
Image 4 of 6
Giga GyroHex Spinner.stl 3d model
3Digiprints
3Digiprints
|
Image 4 of 6
Giga GyroHex Spinner.stl 3d model
2D
3D
Makes
Giga GyroHex Spinner.stl 3d model
Giga GyroHex Spinner.stl 3d model
Giga GyroHex Spinner.stl 3d model
Giga GyroHex Spinner.stl 3d model
Giga GyroHex Spinner.stl 3d model
Giga GyroHex Spinner.stl 3d model
This model is restricted by licensing terms. 

Unleash the power of the Giga GyroHex Spinner! -Easy to print! -Prints in Place -Relaxing -Fits on a 180mmx180mm build plate Model Print Time and Filament Usage Print time Averaging 5-8 Hrs Filament Usage 250-400 Grams

Print Instructions:

It is already oriented in the way it should print. If not make sure it prints with all 3 rings on the build plate. The base should be laying on its side.

Layer Height - .16 - .24 should work just fine. (I did .12 and it turned out terrible !!!)

Infill minimum 15% increase for a more weighted experience

Nozzle Size was designed for a .4 Nozzle


Enjoy! Please share your makes with me I would love to see them! Tag me and I'll repost it on my story!


7 Likes5 DownloadsAugust 4, 2024


7 Likes5 DownloadsAugust 4, 2024
This model is restricted by licensing terms.