Get access to unlimited downloads!!! Includes commercial licenses + access to my exclusive discord!

You have hurry though this plan locks after a certain number of members join!!!

UNLIMITED Limited Plan

Are you a Merchant??? Well, this plan is for you! Get access to commercial Licenses to sell my prints!  PLUS 20 Monthly Downloads!!!

Personal

Unleash the power of the Giga GyroHex Spinner! 
 --------------------------------------------------
-Easy to print!
-Prints in Place
-Relaxing 
-Fits on a 180mmx180mm build plate
--------------------------------------------------
Model Print Time and Filament Usage
Print time Averaging 5-8 Hrs
Filament Usage 250-400 Grams
--------------------------------------------------
Print Instructions:

It is already oriented in the way it should print.
If not make sure it prints with all 3 rings on the build plate. The base should be laying on its side.

Layer Height - .16 - .24 should work just fine. (I did .12 and it turned out terrible !!!)

Infill minimum 15% increase for a more weighted experience

Nozzle Size was designed for a .4 Nozzle

---------------------------------------------
Enjoy! Please share your makes with me I would love to see them! Tag me and I'll repost it on my story!






Giga GyroHex Spinner.stl

Giga Gryo Base.stl

Is it back to school time already!?!?! Maybe you're in school or have kids, this will fit your basic storage needs! Every Part of this pencil has a purpose. There are 3 main storage parts to this pencil! The eraser, the pencil body, and the tip!  I love this thing and I will be making more variations of it! Please I hope you enjoy it and I would to see your makes!
 
Parts Required
Only PLA/Filament!
I used polyterra for the Eraser and Body! This is Polymakers brand! For the tip I used a matte black and beige from bambulab! The Silver is from Inland Filament!

Instructions! PLEASE READ OR RESULTS MAY BE BAD

UPADTED 8/24/24/
Layer Height has to be .2 or smaller. If you are running into issues with quality with the threads. ALSO DO NOT PRINT AT MAX SPEED OR YOU WILL GET BAD RESULTS. THE MODEL IS PRINTABLE!!! ADD BRIMS TO THE PENCIL BODY

To get best results-
layer height - .16
Walls - 3
wall generator type-classic
infill do 45% or higher will help with threads.
Brim on pencil body
supports manual on metal eraser band and the pencil tip. do not have it do supports on threads manually add them. 
Speed- do not go as fast as you can. I would recommend something slower along 150mm/s



There are .3mf files for the tip and the pencil body!
Everything was designed to print with no adjustments to positioning!

The Eraser is print ready and does not require any additional supports!
The Body will need inner and outer brims to secure it the bed plate! no supports required. I would consider slowing down your print speed for the body.

The Metal band prints better if you paint supports in the middle where there is a bridge.
I would use tree supports and pull it off the bed while the bed is hot! Additionally consider using a brim for better support

The Tip also requires supports. Only Paint the supports on the underside of the cone just past the threads! This will form a better connection to the body. However, I did get away without using supports on this!

Check Additional instructions to see what I used!

Happy Printing and Remember Please share your makes!!!

Pencil Pencil Holder (over a foot long!)

Metal Band.stl

Pencil Holder Eraser.stl

Pencil Holder Tip.stl

Pencil Pencil Holder Body 2 HB.stl

Colored Pencil Holder Tip.3mf

Colored Pencil Pencil Holder Body 2 HB.3mf

Messy desk or backpack? This can help! This is a fun storage solution to organize desk goods/supplies! Even Better this thing prints on a Bambulab A1 mini! Happy printing!

IMPORTANT MUST READ SETTINGS
-The settings for this print are non-negotiable. If you try and print it with your own settings, you will get a bad print. Follow my instructions to get results like mine. Your threads also won't print if you do it another way.

Layer Height- .16 cannot be .2 or higher.
Infill - 25% minimum 
Wall generator- classic
Walls-3
Manual supports required on the eraser band and pencil tip. You will need to paint them on the underside of the metal band and for the pencil tip paint them on the rim above the threads. I do organic tree slim.
For brims use outer brim if you are getting poor bed adhesion. 
Speed- I do mine slower since it is a tall print. I do around 150mm/s.


For coloring the pencil, I have not included a .3mf I am learning on how to export just colors. For painting use section height on the eraser band and pencil tip. Otherwise, the print will get an error. For the pencil body you can use gap fil on the lettering. 

IF you run into problems printing this, please let me know. I will help guide you through your issues.

ENJOY.

Mini Pencil Holder (Storage Container)

Eraser Band.stl

Eraser.stl

Pencil Holder Body.stl

Pencil Tip.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

3Digiprint

Achievements

Seedling