This is a robust, three-piece laptop stand designed to raise your screen to eye level for a healthier posture and reduced neck strain. The parts are sized to fit printers with a 256 × 256 × 256 mm build volume (e.g., Bambu Lab X1C) and assemble with glue. Small anti-slip feet under the base (≈ 8×4 mm) improve grip, while four thin TPU tiles on the contact surface protect your laptop and prevent sliding. The design is intentionally minimal and sturdy, tested with a 13" MacBook Air; users should verify stability with their own device and workspace before regular use.

📏 Dimensions line Length/Width/Height: 300/230/250 mm – 11.8/9.1/9.8 in.

🧪 Printing & Assembly Tips (minimal) Material: PLA or PETG (main parts); TPU for 4 top pads. Layer height: 0.2–0.24 mm. Infill: 15% grid/gyroid. Supports: Required but limited. Parts & fit: Prints as 3 pieces within 256³ mm; dry-fit, then glue (CA or epoxy). Feet & pads: Add 8×4 mm bumpers under the base; glue TPU pads (~1.5 mm) to the top contact areas. Safety note: Stability remains the user’s responsibility.