This 3D model is replica of Jetpack from starwars
Jetpack is a part of the Ursa Wren set which includes Armor, Helm, Jetpack, Gauntlets and Westar 35 Blaster.
Whole Ursa Wren set (https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/ursa-wren-bundle/)
Jetpack can be attached into armor easily
!(https://3d-mon.com/wp-content/uploads/2020/03/jetpack2-300x204.jpg) !(https://3d-mon.com/wp-content/uploads/2020/03/jetpack-armor-300x207.jpg)
Files contain pieces of the jetpack (STL) ready to be 3D printed and complete jetpack files (OBJ) , that are not cut into smaller pieces.
SCALE
At 100% scale the dimensions are:
Width approx. 400 mm Length approx. 123 mm Height approx. 330 mm
You can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.
PRINTER SETTINGS
As the jetpack is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. Printing settings will vary greatly depending on your specific printer.
If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com/preorder
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. Here are some links to our social media where you can join our community or just look at more of our creations: