It comes in three different heights to fit different sized blasters. For example, you can use a shorter one for the stock of a rifle and a longer one for the barrel.

The model is made from 5 different parts that are designed to be joined together with screws to achieve high flexibility in any environment. The model can be either used as a table stand or attached to a wall. The assembly is described with pictures that are part of the download file.

For the assembly of one model, you will need: three M4x16 (8x5/8inch.) screws, four M4 nuts, some glue and we also recommend using one M4x20 (8x3/4inch.) screw for the base.

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and assembled parts in one file. All parts are placed on the print bed as we would print them to save you time.

Check out the blaster collection here! : https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/star-wars-blaster-collection/

** SIZE** At 100% scale the model’s dimensions are approximately: ** Width** 51 mm ** Length** 84 mm ** Height** 110 / 140 / 170 mm

You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well and that assembly will be possible.

This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.

Printing settings will vary greatly depending on your specific printer.

Seek out more of our legendary works on Thangs and consider joining our membership which grants you access to: 🪐 500 models including Star Wars cosplay armors, helmets, and accessories 🚀 Our collection of over 120 blasters (and more are coming!) 🌠 Rapidly growing collection of over 60 customizable lightsabers 🚀 Incredibly detailed spaceships for SLA printers and more... 🔥 Our membership begins at just $9.75 per month May the Force be with you! Follow us and tag us on social channels to remain connected across the stars! 🌟