Satine Kryze - Accessories (Clone Wars)

These are digital 3D printable models of iconic accessories worn by Satine Kryze in the Star Wars clone wars animated series.

The Belt part is split into two main pieces – the oval ornamental piece is meant to be glued. The Gems are modeled and ready to be 3d printed, however, if you prefer real gems, we modeled them to be easily replaced by cabochons of the same size: The gem on the neck and forehead is 18x18 mm and the gem on the belt is 25x18 mm (see these for example: https://www.koralky.cz/Vyhledavani?fraze=kabo%C5%A1on )

Modeled using these dimensions of the head: Width 148 mm, Height (top to chin): 219 mm, Length: 192 mm

Please keep in mind that the Belt might need to be scaled accordingly to your dimensions, it was modeled around a figurine with waist circumference of around 86cm.

The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces.

SIZE At 100% scale the biggest model’s (belt) dimensions are approximately: Width 320 mm Length 112 mm Height 217 mm You can scale the model as you wish but we can’t guarantee that at a much smaller size the model will print well.

3D PRINTING SETTINGS We use these settings for most of our prints: Layer height 0.15 mm Infill 15% Supports 45° For parts that are tall but have a small base, we use a 10 mm brim for better bed adhesion.

We try to make the models in a way that uses as little support material as possible. This model is meant to be post-processed after printing. This can be gluing, sanding, painting, etc.

Printing settings will vary greatly depending on your specific printer.

Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic. We’ve been making 3D printable models for more than a decade. We make a lot of cosplay accessories but we also make all sorts of interesting 3D models. You can join our community or just look at more of our creations here: https://3d-mon.com/links/