Darth Revan helmet from Star Wars Old Republic
The helmet has extra anti-fog holes so you can breath easily.
For more info about this character check this link: http://starwars.wikia.com/wiki/Revan This model is a wearable helmet. Files contain pieces of the helmet ready to be 3D printed and complete helmet files, that are not cut into smaller pieces. The model is fan-made.
SCALE:
At 100% scale the helmets inside dimensions are: Width approx. 174 mm (6.8 inches) Length approx. 240 mm (9.5 inches) Height approx. 265 mm (10.4 inches) You can scale the model according to your head measurements. It is good to make it bigger and then add cushioning to the inside for a snug and comfortable fit.
PRINTER SETTINGS As the helmet is quite big, it is meant to be post-processed. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament. For reliable printing, we also recommend setting a brim to the helmets shell parts, because of their height and low thickness. It will ensure, that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. Here are some links to our social media where you can join our community or just look at more of our creations: