Bo-Katan Mandalorian Armor
This model is wearable Armor of Bo-Katan from Mandalorian series
Files contain pieces of the model (STL) ready to be 3D printed and 3D model files that are not cut into smaller pieces (OBJ) The rest of the Bo Katan set can be found (https://3d-mon.com/3d-model/groupe/unisex3dprintmodel/bo-katan-mandalorian-armor-bundle/)
SCALE
At 100% scale the model should fit 170 cm tall female (about 5 ½ feet)
You should scale the model according to your body measurements.
PRINTER SETTINGS
As the armor is created for people tall 170 cm, it is big and meant to be scaled and post-processed, to fit your body well and comfortably. We recommend a layer height of 0.1 to 0.3 mm on FDM printers. All parts are aligned to the printing platform for easy manipulation. Most of the parts need minimal or no use of printing supports to save printing time and filament But some parts definitely need supporting. For reliable printing, we also recommend setting a brim to the armor shell parts, because of their height and low thickness. It will ensure that the parts will not come off the printing platform during the printing process. Printing settings will vary greatly depending on your specific printer.
If you’d like to suggest what we should do next, check out our pre-order page and fill in your suggestion: 3d-mon.com/preorder
Do you like the model and don't have a 3D printer? There are lots of people who offer 3D printing services these days. Try searching for someone who offers them in your area.
This fan-made model was brought to life by 3Demon. We are a group of modeling and 3D printing enthusiasts based in Prague, Czech Republic. Here are some links to our social media where you can join our community or just look at more of our creations: