Ashtrays with Scorpions band logo or Cancer image.

Can be used as a decor or to keep keys or for personal use.

If you want to use it, add water to avoid burning the surface of the ashtrays.

**_Print Settings:_**

Supports: No

Resolution: 0.15 mm

Infill: 10%

Filament material: PLA


Ashtray Scorpions/Cancer

cendrier_scorpions.stl

This is Winnie holding pencils in a honey pot.

**_Print Settings:_**

Supports:
For Winnie : Yes
For the pot : No

Infill: 5%

Filament material: PLA


Winnie Pencils and Lithophane Holder

Winnie_assis_miel.stl

3 funny pots for coffee.

I made 3 sizes (9, 12 and 15 cm high) and 2 lids (with or without handle).

**_Print Settings:_**

Supports: No

Resolution : 0.2 mm

Infill: 5%

Filament material: PLA


Coffee Pots

pot_150.stl

This is a bird for magnets.

I stopped the printing (about at 2 mm hight) to put up to 3 magnets. (2 are enough)

You can find them here https://www.amazon.fr/dp/B06X977K8L?psc=1&ref=ppx_yo2ov_dt_b_product_details

dimensions of the magnets : 10x2 mm (diameter x height)

**_Printing settings:_**

Supports: No

Resolution : 0.15 mm

Infill: 5%

Filament material: PLA


Bird Magnet

Bird_magnet.stl

Mario is so strong, he can support a phone !!

Each piece is can be assembled (I just painted a bit the face and the hat).
No glue needed.

_**Printing settings:**_

Supports: Yes (trees)

Resolution : 0.2 mm or 0.15 mm

Infill: 5 or 10%

Filament material: PLA


Mario Phone Holder

dungaree.stl

3D contemporary vase in marble color (can be changed if you want to try in grey or black or any other color).

Simple design and easy settings make this vase a nice idea for a gift.

The size is modifiable.

**_Printing settings:_**

Supports: No

Resolution: 0,2 mm

Filling: 5 ou 10%

Filament: PLA



Contemporary Vase

vase.stl

Sonic personnages

Ray is a personnage from Sonic's world.

Printing settings: 

Supports: Yes (tree touching buildplate)

Resolution : 0.1mm

Infill: 0%

shells thickness: 0.8 mm

Filament material: PLA

Ray the Flying Squirrel

Ray.stl

3D statue that was printed in a marble color (but can be realized in any color).
Great idea for a small gift or a decoration for your living or an open space.

The size can be changed.

**_Printing settings:_**

Supports: No

Resolution: 0,15 mm

Filling: 5 ou 10%

Filament: PLA

Contemporary statue

Statues.stl

Chaos are the little things from Sonic Garden

Supports : yes (I printed it horizontaly)

filling: 5%

filament : PLA



Chao

Chao.STL

A locomotive to be built where USB cards, SD cards or SIM cards can be stored.

No need for support or glue (but depending on your printing settings glue might be needed somethimes)

I uploaded the different parts as I drawn it so some part need a rotation before being printed. Some parts have to be duplicated.

The litophane on the photo is a personnal picture so I blurred the faces.

To create your own lithopanes I recommande the website below:
https://tool.itslitho.com/CreateModel

And to fit with the wagon, I put the parameters in the pictures.
(don't hesitate to ask me if you have a question)

**_Print Settings_**

Supports: no

Resolution : 0.1 mm (but 0.15 mm for big objects)

Infill: 5 or 10%

Filament material: PLA


Train USB/Pencils/Lithophane Holder

base.stl

This is a modular pencil holder that can have the shape you want.

I uploaded 7 sizes and 2 wedges

**_Printing settings:_**

Supports: No need

Resolution : 0.2 mm

Infill: 0%

Filament material: PLA

Modular Pencils or Pens Holder

Pot_4cm.stl

Items for a game with pirate cannon or board games.

Pirate items

Palm tree to assemble.

All parts can be assembled except the nuts, I just glued them.

**_Printing settings:_**

Supports: No need except for the leaves

Resolution : 0.2 mm
0.1 for the trunk with texture

Infill: 5%

Filament material: PLA



Palm Tree

trunk_with_texture.stl

Captain Shadow is a Pirate version of Shadow :)

**_Print Settings:_**

Supports: Yes (tree touching buildplate)

Resolution : 0.1mm

Infill: 0%

shells thickness: 0.8 mm

Filament material: PLA


Captain Shadow Pirate

Shadow.stl

In this game Teams Helm and Teams Anchor are confronting each other.
The first who takes down 3 targets wins !

To increase the difficulty, 3 sizes of targets and 3 vertical positions are available.
The recommended distance between the cannon and the targets is 1 m or 1.5 m (it's starting to be fun and challenging).

The springs might be fragile to handle but once placed inside the cannon they are steady and durable.
We tested them and played several games and they didn't break.
The spring can be quite powerful (the bullets can easily go as far as 2 m) so I made 3 springs with different strength.

The holes inside the base are intended for a neat.

Warning: when playing it is recommended not to target the humans ;-)
Warning for children: be careful for kids under 6 years old, the cannonballs are about 1,5 cm.

For the decor check my Palm Tree and my Pirate version of Shadow :)

**_Printing settings:_**

No support is needed except for the springs, for which I used trees.

It is not obligatory, but you can use a 1 mm support for the wheel trees and the cannonball to elevate them in order to have a nice round shape.
For the rockers, the holes have a better shape with a bit of support.

Resolution : 0.2 mm
but 0.1 mm for small parts

Infill: 5 or 10%

Filament material: PLA


Pirate Cannon Game 

Canon_anchor.stl

Canon_Helm.stl

post_bottom.stl

This is a pile of rope with some cannonballs for decor for board games.

It can also be used as cup for various tokens

Pile of Rope

corde.stl

Spring_small.stl

Spring_strong.stl

trunions.stl

Wedge.stl

wheels_left.stl

wheels_right.stl

Wheels_tree.stl

cannon_holder.stl

cannonballs.stl

end_rod.stl

rod.stl

Spring_less_powerfull.stl

hinges_R_L.stl

Pins.stl

post_left.stl

post_right.stl

rockers.stl

stem.stl

target_anchors.stl

targets_helm.stl

anchor_token.stl

anchor_token_holder.stl

helm_token.stl

helm_token_holder.stl

Hey guys ! I am Math and in daily life I work as a thermal engineer, but in my spare time I explore 3D printing. I love learning and working on new projects so my portfolio varies from video games characters figurines to modern home design items that I create for my family. I try to add new models every week. 
Feel free to contact me if you have any questions.   

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

3Degrees

Achievements

Seedling

Debutant

Pinned models

Pirate Cannon Game

Ashtray Scorpions/Cancer

Winnie Pencils and Lithophane Holder

Coffee Pots

Bird Magnet

Mario Phone Holder

Contemporary Vase

Sonic personnages

Ray the Flying Squirrel

Contemporary statue

Chao

Train USB/Pencils/Lithophane Holder

Modular Pencils or Pens Holder

Pirate items

Palm Tree

Captain Shadow Pirate

Pirate Cannon Game

Pile of Rope