This remix of the Treasure Chest Puzzle Box - has gone to the dark side.
Printing
All parts can be printed without supports.
Use a brim if you have bed adhesion or curling issues.
Print the Axle with at least 50% infill. The weight is necessary for it to function.
Assembly
See video for detailed assembly.
Test fit parts before gluing.
If slats do not slide smoothly, sanding the sides down slightly may help. Silicone lubricant like Super Lube cam also help.
To avoid accidentally gluing parts that are supposed to move, only apply glue to the bottom frame when closing up the box.
Options
Heavy Axle Slightly longer to print, but more mass to help it react reliably to puzzle rotation.
Can I sell copies of this?
Sorry, no. This model is under a non-commercial license because it is based directly on an existing IP. The puzzle this is based on can be sold.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.