This simple spring latch can be used on its own or remixed into other models to add an easy snap-fit mechanism.
Printing
- All parts can be printed without supports.
- Print the spring with enough perimeter lines that the flexible arms are solid.
- Tested with PLA and PETG.
Assembly If attaching to a wall, nail or screw the spring into the wall surface. Make sure any hardware sits flush or nearly flush with the latch surface.
If attaching to a 3D printed object, use a strong glue. 3D Gloop is a good option - it will fuse the plastic together into a very strong bond.
Options
The spring comes in both tight and loose versions. If scaling down, use the the tight spring to keep as much strength as possible. If scaling up, stick with the looser spring.
If the spring feels too loose, try the “Frame with Tighter Clearance”, with has half the clearance of the original.
Can I sell copies of this?
Yes! This project was shared under the Creative Commons - Attribution license.
This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.
Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.
This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.